Inicio / Conocimiento / Menorca fire tank Poliurea Spray AC P350
Menorca fire tank Poliurea Spray AC P350
Notas de ingeniería. No un blog. 408,000 litres in Sant Lluís, Menorca. Poliurea Spray AC P350 (proyectado en caliente poliurea) is the named lining on the metal fire tank.
Poliurea Spray AC P350 (proyectado en caliente poliurea) is the membrane named on the 408,000 litre metal fire tank at a supermarket in Sant Lluís, Menorca. Therefore the specifier writes the commercial name and the chemical type in the same sentence. Inside and outside are different stacks.
Where Poliurea Spray AC P350 sits on the tank
Inside, foam was applied, then Poliurea Spray AC P350. Outside, ProLine PU AL Imprimación (monocomponente poliuretano imprimación for galvanised and non-ferrous metal) first. Then Poliurea Spray AC P350 as the intermediate. Then ProLine PU 1000 (monocomponente poliuretano top coat). Catalogue 2024 lists PU AL Imprimación for C3–CX to ISO 12944-2:2018.
However, a roof 1K coat is not this tank lining. Also, do not invent kg/m². Read the current TDS, then the calculadora.
See Poliurea Spray AC P350 on liquid containment, ProLine PU AL Imprimación and documentos.
Outbound reference: ISO 12944-2 — corrosivity categories.
First, name the fire-water exposición. Then name Poliurea Spray AC P350. After that, keep inside and outside on separate clauses.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the current sheet, then the calculadora.