Home / Knowledge / Rayston Spray D50 biogas lining and gas barrier
Rayston Spray D50 biogas lining and gas barrier
Engineer notes. Not a blog. A Rayston Spray D50 biogas lining is a named hot-spray polyurea. It is not a 1K roof coat.
Write a Rayston Spray D50 biogas lining on the membrane Catalogue 2024 marks for soil gases. Rayston Spray D50 (hot-spray polyurea) is a foundation membrane with a very low radon diffusion coefficient. Krypton magazine NUM.3 (March 2023) tests it as an inner lining for biogas digesters against methane and carbon dioxide. Therefore the specifier writes the commercial name and the chemical type in the same sentence.
What a Rayston Spray D50 biogas lining actually covers
Catalogue 2024 lists Rayston Spray D50 for radon-gas barriers, building foundations, tanks of aggressive chemicals, wastewater plants, biogas digesters, and primary and secondary containment. It is CE EN-1504-2. NUM.3 records laboratory impermeability to CH4 and CO2, plus chemical resistance in the acidic digester. Keep those sentences on this name. Do not move WRAS from Polyurea Rayston (pure polyurea) onto a biogas tank.
However, Impermax 2K M (two-component solvent-free aromatic biobased polyurethane) is the catalogue radon barrier written as a cold 2K. Do not collapse D50 and 2K M. Also, do not invent kg/m². Mix, overcoat and consumption stay on the current TDS, then the calculator.
How to schedule a Rayston Spray D50 biogas lining
First, name the digester, the buried raft or the soil gas. Then name Rayston Spray D50 (hot-spray polyurea). After that, keep the aliphatic finish on the current sheet where UV is the exposure. In addition, size the area on the calculator once the sheet is read.
See Rayston Spray D50, foundations and radon-gas barriers, purification plants, liquid containment and documents. Area is sized on the calculator.
Outbound reference: CEN-CENELEC — EN 1504-2.
A digester photograph is not a roof ETA. Keep Rayston Spray D50 on the gas barrier the magazine names.
Therefore the current TDS remains the source for mix ratio, overcoat and consumption. A number invented here would be a specification error.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the current sheet, then the calculator.