RAYSTON SPRAY ROBOT: Polyurea Car Park Floor in 8 Hours

Polyurea spray robot RAYSTON SPRAY ROBOT spraying a car park floor with Rayston Floor D50 FR
Knowledge · Application technology

RAYSTON SPRAY ROBOT: a polyurea car park floor back in service in 8 hours

Reviewed by: Krypton Chemical Product Management

A car park that runs every day cannot close for days to get a new floor. On this project in Spain, RAYSTON SPRAY ROBOT sprayed Rayston Floor D50 FR over an outdoor parking deck, the surface was finished with aliphatic Kryptanate 100 FLEX, and the car park reopened to traffic in 8 hours. At Krypton Chemical we manufacture both the robot and the materials, and this is how the whole system works.

Location: SpainApplication: Outdoor car parkSpraying: RAYSTON SPRAY ROBOTBack in service: 8 hours

Outdoor car park — Spain

Automated spraying with RAYSTON SPRAY ROBOT, a Rayston Floor D50 FR membrane and a Kryptanate 100 FLEX topcoat, with the car park back in service in 8 hours according to the project data published with the video. Krypton Chemical manufactures both the robot and the materials.

01 · What RAYSTON SPRAY ROBOT is

A floor spraying robot manufactured by Krypton Chemical

RAYSTON SPRAY ROBOT is an automated spraying unit that drives across the floor and carries the spray gun on a transverse rail, laying down strip after strip at the same speed, height and overlap from the first pass to the last. We designed it at Krypton Chemical to work with standard hot-spray units, low-pressure equipment and airless machines, so contractors can run it with the machine they already own.

The build is simple, with few moving parts, which keeps spare parts and maintenance to a minimum. The frame is lightweight aluminium, so it is highly manoeuvrable and simple to use, and with few moving parts the spares you need to keep are kept to a minimum. The robot does not replace the certified applicator: the applicator runs the job, sets the machine and checks thickness, while the robot does the repetitive spraying.

Maximum spray width3.10 m (122 in)
Rail length3.25 m (128 in)
Longitudinal speedcontinuously adjustable, 0–8 km/h
Gun speed on the boom (cross direction)continuously adjustable
Gun height above floor0.6–1.2 m
Gun anglevariable
Framelightweight aluminium, few moving parts
Compatibilitystandard hot-spray units, low-pressure equipment, airless machines
Outputup to 1,500 m² per day per crew and machine
Slopesup to 10%
Dimensions200 × 90 × 76 cm
Weight280 kg

Source: RAYSTON SPRAY ROBOT page of the Krypton Chemical 2026 catalogue (p. 72) and the Krypton Chemical Italia polyurea catalogue (pp. 36–37). Output figure from the Krypton Chemical waterproofing systems brochure (p. 15).

02 · How it works

How does the robot spray a car park floor?

The robot moves forward over the slab at a speed set by the applicator, while the gun travels across the rail, covering a strip up to 3.10 m wide on each pass. With speed, height and angle held constant, the spray pattern stays uniform and the thickness stays even across the whole area.

The gun design reduces spray mist, and the electrostatic system means less contamination from that mist, so material ends up on the floor rather than in the air and the site stays cleaner. Gun speed along the boom (cross direction) is continuously adjustable and the gun angle can be varied, which gives the applicator accurate thickness control for each product and project. Because the robot works on slopes up to 10%, ramps and sloped parking decks are part of the same job.

With Rayston Floor D50 FR specifically, application is with 2-component hot-spray equipment: component A at 65–70 °C, component B at 70–75 °C, hose at 70 °C, pressure 130–150 bar, and 2–3 kg/m² as a rule. Gel time of the mix is 8–10 s at 25 °C, which is exactly why steady, repeatable passes matter.

Application values from the Rayston Floor D50 FR technical data sheet.

03 · Comparison

What changes compared with hand spraying?

With hand spraying, thickness depends on the operator: hand speed, gun height and overlap change from pass to pass, and the membrane thickness changes with them. On a large parking deck, that means thin spots in some areas and wasted material in others.

Even thickness

Constant speed, height and overlap on every square metre, which is what the data sheet asks you to check during application.

Less mist, less contamination

The gun design reduces spray mist, and the electrostatic system reduces contamination from it.

Up to 1,500 m² a day

The robot raises application output to up to 1,500 m² per day per crew and machine, with a 3.10 m pass and up to 8 km/h.

Ramps included

Works on slopes up to 10%, so ramps and sloped decks get the same system.

Light and low-maintenance

Lightweight aluminium, highly manoeuvrable, few moving parts and few spares.

Same quality all day

The robot does not get tired: it works as well late in the afternoon as early in the morning, in hot or cold weather, and electronic control helps avoid polyurea overconsumption.

Works with your machine

Compatible with standard hot-spray units, low-pressure equipment and airless machines.

In a live car park every hour of closure costs something: lost spaces, unhappy users and pressure on the contractor. The robot does not replace experience; it removes the biggest variable from the job, the operator’s hand.

04 · System layers

The car park floor system, layer by layer

The system on this project is our outdoor car park build-up based on Rayston Floor D50 FR polyurea membrane with a Kryptanate 100 FLEX polyaspartic finish. Our channel shows the same build-up under the name RAYSTON FLOOR PUA PARK on an earlier outdoor parking project.

01 · Substrate preparation

Concrete is prepared mechanically by shot blasting, scarifying or diamond grinding to open the pores, then vacuumed. The substrate must be flat, cohesive (pull-off at least 1.5 N/mm²), clean and dry, with moisture below 4%, ambient humidity below 85% and substrate temperature between 10 and 40 °C. Porous substrates need a suitable primer before D50 FR to avoid bubbles and open pores.

02 · Rayston Floor D50 FR, sprayed by the robot

A 2-component hot-spray polyurea that cures into a hard flooring membrane with fire-resistant properties. RAYSTON SPRAY ROBOT sprays it as one continuous, seamless layer with no joints or laps; the required thickness is usually reached in a single coat.

Hardness50 Shore D
Elongation at break300%
Tensile strength21 MPa (EN ISO 527-3)
BCA wear resistance10 µm (UNE EN 13892-4)
Impact resistance>24.5 Nm (UNE EN ISO 6272)
Bond strength3.8 N/mm² (UNE EN 13892-8)
Reaction to fireBfl-s1, EN 13501-1:2018
CertificatesOS 10; CE marking to EN 13813
Vehicular trafficpossible after 4–5 hours
Top coatcan be applied after 60 minutes

03 · Kryptanate 100 FLEX

A flexible, aliphatic, solvent-free polyaspartic finish with 100% solids. Being aliphatic it does not yellow in sunlight, which matters outdoors because aromatic polyureas change colour under the sun. It is applied by roller or spreader (spraying is not recommended); recommended thickness starts at 250 g/m².

Hardness40–45D colourless, 50–55D pigmented (ISO 868)
Maximum elongation180% colourless, 125% pigmented
Tensile strength6 MPa colourless, 9 MPa pigmented (EN ISO 527-3)
Tear strength100 N/mm (ISO 34-1)
Gloss80–90% at 60°
Touch-dry75 min at 21 °C / 35% RH; 2.5 h at 10 °C / 60% RH
Return to servicelight traffic usually one hour after touch-dry

Values from the Rayston Floor D50 FR and Kryptanate 100 FLEX technical data sheets; typical values that depend on site conditions.

3.10 m
Max spray width
0–8 km/h
Travel speed
1,500 m²
Per day per crew and machine
8 h
Back in service on this project

The layers

  1. Mechanical preparation of the concrete
  2. Rayston Floor D50 FR, robot-sprayed
  3. Kryptanate 100 FLEX aliphatic topcoat

In this system

  • RAYSTON SPRAY ROBOT
  • Rayston Floor D50 FR: Bfl-s1, OS 10, CE EN 13813
  • Kryptanate 100 FLEX: non-yellowing in sunlight
  • Outdoor car parks and slopes up to 10%

05 · The project

The car park in Spain: from preparation to traffic in 8 hours

The project is an outdoor car park floor in Spain. RAYSTON SPRAY ROBOT sprayed Rayston Floor D50 FR automatically, with no hand spraying, Kryptanate 100 FLEX was applied as the finish, and the car park was open to traffic again in 8 hours.

The 8-hour figure comes from the project itself, as stated in the title and description of the video on our channel; it is not a generic data sheet value. The data sheets give the partial times: vehicular traffic on D50 FR after 4–5 hours, top coat after 60 minutes, and Kryptanate 100 FLEX touch-dry in 75 minutes at 21 °C with light traffic one hour later. The real programme on any site depends on temperature, humidity and the condition of the concrete.

ProjectOutdoor car park floor coating
LocationSpain
ApplicationRAYSTON SPRAY ROBOT
ProductsRayston Floor D50 FR + Kryptanate 100 FLEX
Back in service8 hours (project data)
ManufacturerKrypton Chemical (Rayston)

Where else has the robot been used?

This is not the robot’s first job. The 6,000 m² deck of the Colmenar motorway bridge over the M-40 in Madrid was waterproofed with RAYSTON SPRAY ROBOT. Our channel also has a 2021 video of the RAYSTON FLOOR PUA PARK system being sprayed by the robot on another outdoor car park, where the time from substrate preparation to opening was also 8 hours. Krypton Chemical gives customers technical advice, on site when needed, to put this technology to work. Read about the M-40 bridge in Colmenar with Impermax Polyurea H Flex.

Read more on car park floors: OS10 car park flooring with Rayston Floor PUA 30 PARK, Rayston Floor D50 FR polyurea, outdoor parking and parking ramps.

07 · FAQ

Frequently asked questions

Does the robot replace the applicator?

No. The certified applicator runs the job, sets the machine and checks thickness; the robot does the repetitive spraying at constant speed and overlap.

How wide does it spray per pass?

Up to 3.10 m, on a 3.25 m rail.

Can it work on ramps?

Yes, on slopes up to 10%.

Will it work with my spray machine?

It is designed for standard hot-spray units, low-pressure equipment and airless machines. Contact our technical office to confirm compatibility with your machine.

How fast was this car park back in use?

In 8 hours, according to the project data published with the video. The Rayston Floor D50 FR data sheet states vehicular traffic is possible after 4–5 hours.

Does the top coat turn yellow in the sun?

No. Kryptanate 100 FLEX is aliphatic and does not yellow on exposure to sunlight.

What is the fire classification of Rayston Floor D50 FR?

Bfl-s1 to EN 13501-1:2018; the product holds OS 10 certification and CE marking to EN 13813.

How many square metres a day can it spray?

Up to 1,500 m² per day per crew and machine, according to the Krypton Chemical waterproofing systems brochure. Real output depends on the layout, obstacles and product.

Has the robot been used on other projects?

Yes, including the 6,000 m² Colmenar bridge deck over the M-40 in Madrid and outdoor car parks with RAYSTON FLOOR PUA PARK.

Does the robot reduce contamination on site?

Yes. The gun design reduces spray mist and the electrostatic system reduces contamination from it.

Who manufactures the system?

Krypton Chemical manufactures both RAYSTON SPRAY ROBOT and the Rayston and Kryptanate materials, with factories in Spain and Egypt and companies in Italy, the UK and France.

Links

What next

Products

Rayston Floor D50 FR, Kryptanate 100 FLEX and the rest of the Rayston range.

Products

Documents

Technical data sheets and catalogues.

Documents

Calculator

Work out material consumption for your car park area.

Calculator

Talk to our technical office about your car park

Send us the area, the concrete condition and the type of traffic, and we will propose the system and the programme.

Contact us

Knowledge

Knowledge

Talk to a distributor

Distributors

Applications

Applications

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top