Dokumen

Beranda · Dokumen

TDS · sertifikat · panduan

Dokumen

Pusat Dokumentasi Teknis: telusuri sertifikat persetujuan, lembar data teknis (TDS), dan panduan rekayasa terkini.

RAYSTON systems
Keluarga Kedap air Lantai Pelindung Pelengkap Produk Kalkulator

Kedap air

Single-component cold PU

Impermax QC

TDS 1K ETA 06/0263 BBA 11/4836 Lembar data

Fast-catalysis aromatic polyurethane for low-temperature application. Consumption, mix ratio and recoat: current sheet only.

Product Kalkulator

Impermax A

TDS 1K ETA 06/0263 BBA 11/4836 Lembar data

Aliphatic moisture-activated polyurethane. Solar-reflective membrane; no separate aliphatic lapisan atas. Consumption, mix ratio and recoat: current sheet only.

Product Kalkulator

PU-bitumen

Acrylic

Water-based PU

Dua komponen cold PU

Cold polyurea

Hot-spray polyurea

Hot-spray hybrid

Aliphatic top coats

Impertop Fast Flex S

TDS — Lembar data

IMPERTOP FAST FLEX S Ultra high solids content polyaspartic aliphatic elastic protective finish to be applied in high temperature ambient conditions DESCRIPTION INFORMATION ON THE FINAL PRODUCT Ultra-high solids content polyaspartic aliphatic elastic protective finish to be Final state Polyurethane/polyaspartic solid f

Product Kalkulator

Lantai

Self-levelling

Hot-spray floors

PU cement

Floor top coats

Stone binders

Pavistone Epoxy UV

TDS 2K

Current technical data sheet on request. Dua komponen epoxy stone binder with UV stability. Consumption, mix ratio and recoat: current sheet only.

Product Kalkulator

Rubber

Rayston RCB-581A

TDS — Lembar data

RAYSTON RCB-581A Polyurethane binder for rubber crumb DESCRIPTION Chemical Surface contact, 24h, room temperature resistance (0=worst, 5=best) UV stable version of Rayston RCB-580. Suitable for recycled rubber crumb

Product Kalkulator

Pellets EPDM and SBR

TDS — Lembar data

EPDM AND SBR PELLETS Rubber pellets for synthetic lantai DESCRIPTION indications, and in general, of the inappropriate use or application of these The EPDM and SBR rubber pellets are used combined with the Rayston materials.

Product Kalkulator

Decorative Flakes

TDS — Lembar data

DECORATIVE FLAKES Decorative chip mixtures for lantai DESCRIPTION Acrylic resin-based flakes, for decorative lantai uses, when combined with self-levelling PU Rayston resins and coated with aliphatic PU (Colodur, Colodur ECO). Their incorporated pigment gives a very good UV resistance. Up to 350

Product Kalkulator

EP Coat 100 Clear

TDS — Lembar data

EP COAT 100 CLEAR 100% solids, colourless performance epoxy coating for lantai applications Mechanical Maximum elongation: 2,5% properties Tensile strength: 17 MPa DESCRIPTION Tear: 29 N/mm Colourless, 2-component epoxy coating for concrete surface protection.

Product Kalkulator

Rayston RCB-580S

TDS 1K Lembar data

RAYSTON RCB-580S Slow version of aromatic rubber binder for applications in conditions slightly elevated temperatures DESCRIPTION APPLICATION GUIDELINES One component liquid aromatic polyurethane composition. Suitable for recycled Support must be cleaned and residues (dust, mold, etc.) removed. Apply by

Product Kalkulator

Rayston RCB-580

TDS 1K Lembar data

RAYSTON RCB-580 Polyurethane binder for rubber crumb DESCRIPTION RECOMMENDED COMBINATIONS One component liquid aromatic polyurethane composition. Permanent contact (0=worst, 5=best)

Product Kalkulator

F 0-03, F 01-03, F 03-08, FC 03-08

TDS — Lembar data

F 0-03, F 01-03, F 03-08, FC 03-08 Decorative sand mixtures DESCRIPTION Quartz sand, natural or coloured with selected pigments with excellent quality and light resistance. Suitable for floors. Suitable for spreading over or as a filler for all kinds of floors made with Rayston products, both polyurethane and epoxy

Product Kalkulator

Kryptanate 100 Flex S

TDS — Lembar data

KRYPTANATE 100 FLEX S Elastic and aliphatic protective finish, solvent-free polyaspartic, to be applied in environmental conditions of high temperatures DESCRIPTION Storage and Store between 10º and 30ºC, protected from

Product Kalkulator

Pelindung

Polyurea linings

Epoxy

PU corrosion

Krypton ProLine THINNER

TDS 1K Lembar data

KRYPTON PROLINE THINNER Solvent for Krypton single-component polyurethane moisture-cured anti-corrosion DESCRIPTION We recommend that you study this information in depth before using and Krypton ProLine THINNER is a slow-evaporation solvent thinner for Krypton’s applying any of these products, although it is particular

Product Kalkulator

Pelengkap

Epoxy primers

Humidity Primer LV

TDS 2K

Current technical data sheet on request. Low-viscosity humidity primer for residual moisture in concrete. Consumption, mix ratio and recoat: current sheet only.

Product Kalkulator

PU primers

Primer PU 2K BIO

TDS 2K Lembar data

Dua komponen solvent-free bio-based polyurethane primer for biobased membranes on dry, highly porous supports. Consumption, mix ratio and recoat: current sheet only.

Product Kalkulator

Spray foam

Injection

Aquapur

TDS 1K Lembar data

Polyurethane injection resin for water-bearing cracks. CE marking as per EN 1504-5. Consumption, mix ratio and recoat: current sheet only.

Product Kalkulator

Tecnocem

TDS 2K Lembar data

Three-component epoxy-cement mortar. Moisture barrier on damp substrates before resin systems. Consumption, mix ratio and recoat: current sheet only.

Product Kalkulator

Geomax

TDS — Lembar data

GEOMAX Geotextile for liquid waterproof reinforcement DESCRIPTION AND APPLICATIONS INSTRUCTION FOR USE Thermowelded geotextile fabric made of synthetic polyester/polyamide fibres. Unroll the product over the surface and cut using suitable tools. As a

Product Kalkulator

Rayston Flex 70

TDS — Lembar data

RAYSTON FLEX 70 Polyurea mastic, mechanically applied. DESCRIPTION Watertightness Watertight (EN-1928) Rayston Flex 70 is a highly elastic 2-component resin, modified-polyurea based, (60kpa, 6 meters

Product Kalkulator

Slow Solvent PU

TDS — Lembar data

SLOW SOLVENT PU Solvent mixture for viscosity and curing adjustment in polyurethane compositions DESCRIPTION AND APPLICATIONS and they do not constitute any product guarantee for the installer, who must Solvent mixture, fully compatible with the solvent-based Rayston product range. consider them as simple information.

Product Kalkulator

Rayston Spray Foam 30W

TDS 2K Lembar data

RAYSTON SPRAY FOAM 30W Polyurethane foam bicomponent DESCRIPTION Short-term water ≤ 0.2 kg/m2 IN 14315- Rayston Spray Foam 30W is a rigid dua komponen polyurethane foam system absorption 1:2013

Product Kalkulator

Rayston Vel

TDS — Lembar data

RAYSTON VEL Bituminous membrane with fiberglass base DESCRIPTION Rayston Vel is an underlying sheet consisting of a glass fibre base coated with oxidised bitumen and sand finished on both surfaces. It is iused to provide a controlled bond to the substrate in Impermax Strat system.

Product Kalkulator

Thixotropy Additive

TDS — Lembar data

THIXOTROPY ADDITIVE Anti-sagging additive for Impermax applications DESCRIPTION AND APPLICATIONS MIXING AND APPLICATION Polyurethane products are easy to apply on flat surfaces, but their self-leveling Pour Thixotropy Additive into the ready to use product (e.g Impermax and mix

Product Kalkulator

Rayston Insulation Adhesive

TDS — Lembar data

RAYSTON INSULATION ADHESIVE DESCRIPTION APPLICATION GUIDELINES Rayston Insulation Adhesive is a solvent free, high performance foaming Rayston Insulation Adhesive is extremely versatile. It can bond to a wide

Product Kalkulator

Butyl Tex

TDS — Lembar data

BUTYL TEX Aplikasi dingin adhesive butyl rubber tape DESCRIPTION ENVIRONMENTAL PRECAUTIONS Butyl Tex is a adhesive butyl rubber tape, applicable without heat. It is Inert waste treats the waste according to local applicable law.

Product Kalkulator

Superaccelerator PU

TDS — Lembar data

SUPERACCELERATOR PU Curing additive for Impermax CURING TIME DESCRIPTION Curing time for mixtures Impermax/ Superaccelerator PU, 1 mm thick, The moisture-cured Impermax polyurethane can require, under certain approximate: conditions, a faster curing process, because of job constraints or low

Product Kalkulator

Paint Stripper K

TDS — Lembar data

PAINT STRIPPER K Product for paint, membrane and foam removal DESCRIPTION AND APPLICATIONS the installer will be the only responsible of any damage derived from the partial Concentrated stripping product, highly effective for removal and cleaning of old or total in-observation of our indications, and in general, of the

Product Kalkulator

Pur Cat Additive

TDS — Lembar data

PUR CAT ADDITIVE Curing additive for Impermax POT LIFE DESCRIPTION AND APPLICATIONS Pur Car Additive shortens the working time. The data below give a rough Impermax PU membranes may need a shorter than usual curing time when indication. Data for 35ºC is for reference only since at such temperature Pur Car

Product Kalkulator

Rayston Fiber Net

TDS — Lembar data

RAYSTON FIBER NET Reinforcing net DESCRIPTION AND APPLICATIONS Fiber glass net, alkaline resistant, white. Suitable as a reinforcing net in ceramic tile lantai repairs. Available in densities of 180 g/m2. TECHNICAL DATA INFORMATION ON THE PRODUCT BEFORE APPLICATION Physical state Fiber Glass

Product Kalkulator

Rayston Spray Foam HFO 35

TDS 2K Lembar data

RAYSTON SPRAY FOAM HFO 35 Foam rigid polyurethane bi-component DESCRIPTION Rayston Spray Foam HFO 35 is a rigid dua komponen polyurethane foam system (polyol + isocyanate). It does not contain fibers or products that are bio- hazardous or likely to be. The expansion agent is HFO (trans-1-chloro-3,3,3-

Product Kalkulator

Rayston PU Solvent

TDS — Lembar data

RAYSTON PU SOLVENT Solvent for viscosity adjustments and tool cleaning DESCRIPTION ENVIRONMENTAL PRECAUTIONS Solvent mixture, fully compatible with the solvent-based Rayston product range, Empty containers must be handled taking the same precautions as if they were

Product Kalkulator

Pigment Spray

TDS — Lembar data

PIGMENT SPRAY Pigment pastes for spray-applied products DESCRIPTION AND APPLICATIONS GENERAL REQUIREMENTS Liquid pigment pastes for previous addition to the A-component of the following Follow general instructions on support preparation and application conditions as

Product Kalkulator

Rayston Flex Joint GEO

TDS — Lembar data

RAYSTON FLEX JOINT GEO High performance, elastic, joint sealing system DESCRIPTION Citric acid (100g/l) favourable Rayston Flex Joint Geo is a high-performance sealing system for expansion, Lactic acid (5%) favourable

Product Kalkulator

Matting Additive

TDS — Lembar data

MATTING ADDITIVE Additive for gloss adjustment DESCRIPTION AND APPLICATIONS by roller, keep to a minimum the overlapping marks, spreading the resin in a Polyurethanes are well known for their excellent mechanical properties and are regular pattern as much as possible. Use, if possible, wide rollers.

Product Kalkulator

Rayston Flex 90

TDS — Lembar data

RAYSTON FLEX 90 Modified polyurea mastic for joint filling DESCRIPTION SUPPORT REQUIREMENTS Rayston Flex 90 is a 2-component modified polyurea resin, which cures very In order to achieve a good penetration and bonding, support must be:

Product Kalkulator

Antislip Additive

TDS 1K Lembar data

ANTI-SLIP ADDITIVE Fine or coarse aggregates to be mixed with resin for an anti-slip finish DESCRIPTION SAFETY Satu komponen polyurethane products form high-quality coatings, suitable for Always follow instructions on the Material Safety Data Sheet.

Product Kalkulator

Rayston Fluid

TDS — Lembar data

RAYSTON FLUID Cleaning fluid for spraying equipment DESCRIPTION AND APPLICATIONS Rayston Fluid is a mixture of plasticizers designed for cleaning and conservation of piping and critical internal components of polyurethane/polyurea spraying equipment. Use of Rayston fluid prevents, by

Product Kalkulator

Thickening Additive

TDS — Lembar data

THICKENING ADDITIVE Thickener for polyurethane and epoxy DESCRIPTION ENVIRONMENT The Thickening Additive is used as a thickener for epoxy or polyurethane resins. Empty containers should be handled with the same precautions as if they were

Product Kalkulator

Rayston Spray Foam 40W

TDS 2K Lembar data

RAYSTON SPRAY FOAM 40W Dua komponen polyurethane foam DESCRIPTION Short-term water ≤ 0.2 kg/m2 IN 14315-1:2013 Rayston Spray Foam 40W is a rigid dua komponen polyurethane foam system absorption

Product Kalkulator

Rayston Flex 3040

TDS — Lembar data

RAYSTON FLEX 3040 Polyurethane sealant medium modulus DESCRIPTION CHEMICAL RESISTANCE Single component, elastomer polyurethane sealant for expansion and joints Result: 0=bad resistance, 2.5=medium resistance, 5=good resistance.

Product Kalkulator

Geomax Spray NMDC

TDS — Lembar data

GEOMAX SPRAY NMDC Geotextile for reinforcement of Polyurea Rayston, Rayston Spray D50, Krypton ProLine AB95P and Krypton ProLine CH55 applications DESCRIPTION AND APPLICATIONS INSTRUCTIONS FOR USE Geomax Spray NMDC is a non-woven fabric of polypropylene fibers punched Unroll the product over the surface and cut using s

Product Kalkulator

Epoxy Accelerator

TDS — Lembar data

EPOXY ACCELERATOR Cure accelerator additive for epoxy systems DESCRIPTION AND APPLICATIONS POT LIFE Epoxy resins ere used for priming jobs, as a previous step in kedap air or Addition of Epoxy Accelerator decreases the pot life available for application.

Product Kalkulator

Rayston Fiber

TDS — Lembar data

RAYSTON FIBER Reinforcing mat for liquid kedap air DESCRIPTION AND APPLICATIONS Random-oriented fiber glass mat, forming an homogeneous material. The components are glued together with an emulsion-type binder, soluble in styrene. Good compatibility with a wide range of liquid resins, including

Product Kalkulator

ISO 9001 · CE · ETA · Tarragona
Scroll to Top