Inicio / Conocimiento / Kryptanate M parking floor for a fast return
Kryptanate M parking floor for a fast return
Notas de ingeniería. No un blog. A Kryptanate M parking floor is a polyaspartic traffic coat. It is not a proyectado en caliente poliurea park deck.
Specify a Kryptanate M parking floor when the deck must return to service quickly. Krypton magazine NUM.5 (October 2025) names Flexicar, Palma de Mallorca, at 1,750 m² under Rayston Floor PAS 10. Therefore the specifier writes imprimación plus two polyaspartic coats, not a sample.
What a Kryptanate M parking floor actually uses
NUM.5 prints Imprimación Epoxi 100, then Kryptanate M (bicomponente high-solids solvent-based polyaspartic) in RAL 7031, then Kryptanate M in RAL 7040, then a fine anti-slip aggregate. The magazine cites adhesion, abrasion and corrosion resistance, and a fast return to service. Catalogue 2024 lists Kryptanate M as a high-reactivity polyaspartic acabado.
This is not Rayston Floor PUA 30 PARK. That OS10 system uses Rayston Floor D50 FR (proyectado en caliente poliurea pavement) and Kryptanate 100 LV. Do not collapse the two parking cards. Also, Colodur Eco is a different aliphatic. Keep it off this PAS 10 clause unless the sheet names it.
However, RAL numbers are colours. They are not a thickness. Read consumo from the current TDS. Do not invent kg/m².
Cómo redactar a Kryptanate M parking floor
First, name indoor parking traffic. Then name Imprimación Epoxi 100 and Kryptanate M in one clause. After that, name the anti-slip as the magazine prints it. In addition, size the area on the calculadora once the sheet is read.
See Kryptanate M, Imprimación Epoxi 100, indoor and outdoor parking, road-traffic areas, and documents. Area: calculadora.
Outbound reference: CEN-CENELEC.
An orange column is not a system name. Keep the Kryptanate M parking floor on the polyaspartic the magazine names.
Therefore mix ratio stays on the sheet. First name the imprimación. Next name both Kryptanate M coats. After that open documents. Also keep this card off an OS10 clause.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the ficha vigente, then the calculadora.