Inicio / Conocimiento / Encapsulado Rayston Spray Foam HFO 40
Encapsulado Rayston Spray Foam HFO 40
Notas de ingeniería. No un blog. Encapsulation build. Rayston Spray Foam HFO 40 (rigid bicomponente poliuretano foam) is the recorded insulation.
Rayston Flex 3040 (medium-modulus poliuretano sealant) is named with that foam. Impermax Poliurea H Flex Alum (hybrid poliurea with aluminium pigments) is the waterproofing. Therefore the specifier writes the commercial name and the chemical type in the same sentence. Foam is not the membrane.
El sistema registrado
First, name the insulation: Rayston Spray Foam HFO 40 (rigid bicomponente poliuretano foam, HFO blowing agent) with Rayston Flex 3040 (poliuretano sealant) for movement. Then name Impermax Poliurea H Flex Alum (proyectado en caliente hybrid poliurea with aluminium pigments). Catálogo 2026 lists that finish as UV-stable without a separate aliphatic acabado. The job record applies it as a fast-curing bicomponente membrane whose pigments are written to hold colour in solar exposición.
Do not specify a separate Colodur sealer on this Alum clause unless the current TDS says so. Also, do not invent a kilogram rate. Read consumo from the current sheet, then the calculadora.
Cómo especificar the encapsulation build
Name foam, joint sealant and Alum poliurea as three productos. Keep HFO foam distinct from a hybrid poliurea. An aluminium appearance is a pigmented membrane, not a paint.
See asbestos encapsulation, aislamiento térmico y acústico de cubiertas and productos. Documentos stay on /documentos/.
Official project: kryptonchemical.com — new encapsulation work.
Outbound reference: EOTA.
Depth pins in the foam are a site control. They are not a thickness claimed in these notes.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the current sheet, then the calculadora.
