Inicio / Conocimiento / Acero ProLine C5H en estructura de autopista
Acero ProLine C5H en estructura de autopista
Notas de ingeniería. No un blog. ProLine Acero C5H is a zinc imprimación, a micaceous intermediate and an aliphatic top coat. It is not a poliurea lining.
Specify ProLine Acero C5H as a three-coat anti-corrosion system. Krypton magazine NUM.4 (December 2024) names the C-32 highway, Castelldefels–Garraf, at 1,800 m². Therefore the specifier writes imprimación, intermediate and finish by commercial name.
What ProLine Acero C5H actually is
The magazine prints Krypton ProLine PU ZN Imprimación (zinc poliuretano imprimación), Krypton ProLine AC MIO (micaceous iron oxide intermediate) and Krypton ProLine PU 1000 TC (aliphatic poliuretano top coat). Catalogue 2024 certifies a C5H system to ISO 12944-6:2018 on that family. Keep the ISO mark on the coats the catalogue names. Do not move it onto a hybrid poliurea.
This is not Krypton ProLine AB95 P. That intermediate sits on a different warehouse card. This is not Krypton ProLine CH55, which is a chemical-resistant lining. A highway steel photograph is not a pipe interior.
However, C5H is an atmospheric corrosivity class. It is not a thickness. Read dry-film build from the current TDS. Also, do not invent kg/m².
Cómo redactar ProLine Acero C5H
First, name the exposición as highway steel. Then name PU ZN Imprimación, AC MIO and PU 1000 TC in one clause. After that, cite ISO 12944-6:2018 as Catalogue 2024 prints it. In addition, size the area on the calculadora once the sheet is read.
See Krypton ProLine PU ZN Imprimación, Krypton ProLine AC MIO, Krypton ProLine PU 1000 TC, estructuras metálicas e ingeniería, and documentos. Area: calculadora.
Outbound reference: ISO 12944-6.
A railing photograph is not a floor. Keep ProLine Acero C5H on the protective chapter.
Therefore mix ratio stays on the sheet. First name the zinc imprimación. Next name the MIO. After that name the aliphatic top coat. Also keep this card off a roof membrane.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the current sheet, then the calculadora.