Cold 1K PU is rolled or sprayed as a liquid that cures with air moisture. Impermax (monocomponente moisture-cured poliuretano, 1K PU) is that family. Poliurea en frío is a different rheology. Impermax Cold Polyurea (ETE 17/0509) is roller-applied. Poliurea proyectada en caliente gels in seconds. Polyurea Rayston (pure poliurea) and Impermax Polyurea H (proyectado en caliente hybrid poliurea) are written for large, irregular or vertical work.

Gradas de estadios de fútbol schedule Rayston Fire E (aliphatic fire-rated finish, Euroclass Bs2d0) because the catalogue writes that class for the bleacher membrana. A autonivelante floor body is a different liquid again. Pavifloor / Pavisoft (resin floor body), Raycrete SL and Polyurea H SL must not borrow the stadium photograph.

However, do not swap a 1K roof membrana onto a vertical stand because the viscosity felt similar on another job. Pick the membrana the application page already schedules.

First, name the geometry. Then name the chemistry. After that, read consumo from the current TDS, then the calculadora.

See football stadium stands, Rayston Fire E, and Impermax Cold Polyurea.

Outbound reference: EOTA.

A roller on a vertical stand is not a specification. Match the liquid to the geometry.

Therefore the current TDS remains the source for mix ratio, overcoat and consumo. Then the calculadora sizes the area. However, a number invented here would be a specification error. In addition, the application page is the schedule. First name the exposición. Next name the commercial product and the chemical type in the same sentence. After that, open documents. Also keep the finish on the same clause as the body. A sample, a colour or a photograph does not replace that sentence.

These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the ficha vigente, then the calculadora.