Inicio / Conocimiento / ETAG 033 bridge deck with Impermax Poliurea H Flex
ETAG 033 bridge deck with Impermax Poliurea H Flex
Notas de ingeniería. No un blog. An ETAG 033 bridge deck is a named hybrid poliurea kit. It is not a generic spray.
Cite an ETAG 033 bridge deck on the membrane that carries the mark. Krypton magazine NUM.4 (December 2024) writes Impermax Poliurea H Flex (proyectado en caliente hybrid poliurea) on the Guadalmez–Córdoba railway section in Andalusia. The area is 30,000 m². Therefore the specifier does not borrow a roof ETA.
What the ETAG 033 bridge deck mark covers
NUM.4 states that Impermax Poliurea H Flex is certified with an ETE for bridge-deck waterproofing to ETAG 033, certificate 16/0149, with a 25-year service life. Catalogue 2024 also prints EAD-030675-00-0107 (nº 21/0740) on the same commercial name for decks that move. Keep both citations on H Flex. Do not move them onto Poliurea Rayston (pure poliurea).
NUM.5 (October 2025) schedules the same hybrid on Rayston Proof Bridge: Imprimación Epoxi 100 plus Impermax Poliurea H Flex. Gran Faw Port, Alfaw, is written at 25,000 m². Fast cure is a site fact. It is not a licence to skip the imprimación.
However, ETAG 033 is a bridge-deck kit. It is not a pedestrian terrace. It is not a cool roof. Also, do not print a kilogram rate on this note.
Cómo redactar an ETAG 033 bridge deck
First, name Impermax Poliurea H Flex and the chemical type in one sentence. Then cite ETE 16/0149 as the magazine prints it. After that, name Imprimación Epoxi 100 where the soporte is concrete. In addition, read thickness from the current TDS, then the calculadora.
See Impermax Poliurea H Flex, Imprimación Epoxi 100, bridge decks, and documentos. Area: calculadora.
Outbound reference: EOTA — ETAG y EAD.
A railway photograph is not a floor card. Keep the ETAG 033 bridge deck on the hybrid the magazine names.
Therefore the current sheet remains the source for mix ratio and overcoat. First name the deck. Next name the kit. After that open documentos. Also keep H Flex off a pure-poliurea clause.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the current sheet, then the calculadora.