Inicio / Conocimiento / Cubierta fresca Impermax Aqua en forjado no peatonal
Cubierta fresca Impermax Aqua en forjado no peatonal
Notas de ingeniería. No un blog. An Impermax Aqua cool roof is a white water-based membrane on a maintenance-only roof. It is not a pedestrian terrace.
Write an Impermax Aqua cool roof as a non-pedestrian system. Krypton magazine NUM.4 (December 2024) names the Hilton Hotel, Mexico D.F., at 2,400 m². Therefore the specifier writes maintenance traffic only.
Qué permite un Impermax Aqua cool roof actually is
Impermax Aqua (water-based hybrid aliphatic poliuretano, 1K) is the membrane. Catalogue 2024 marks it CE EN-1504-2. The magazine pigments it white for a cool-roof effect. It is not Impermax A (aliphatic moisture-activated poliuretano). It is not a proyectado en caliente hybrid.
The named build starts with cleaning. Rayston Flex 3040 treats local defects. Mesh reinforces selected areas. Humidity Imprimación LV (epoxi imprimación for residual moisture) is the imprimación the magazine prints as Epoxi H LV Imprimación. After that, Impermax Aqua is the waterproofing layer.
However, a cool-roof colour does not make the deck pedestrian. NUM.4 writes the Rayston system for non-pedestrian roofs, maintenance only. Do not move this card onto stands. Do not move it onto a car-park roof. Also, do not invent kg/m².
How to schedule an Impermax Aqua cool roof
First, name the exposición as maintenance-only. Then name Humidity Imprimación LV and Impermax Aqua in the same clause. After that, keep the white pigment on the current TDS. In addition, size the area on the calculadora once the sheet is read.
See Impermax Aqua, Humidity Imprimación LV, cubiertas, balcones y terrazas, and documentos. La superficie se dimensiona en la calculadora.
Outbound reference: CEN-CENELEC — EN 1504-2.
A white film is not a specification. Keep the commercial name and the chemical type in one sentence. Then send the applicator to the current sheet.
Therefore consumo, mix and overcoat stay on the TDS. A number invented here would be a specification error. First open documentos. Next name the imprimación. After that name the membrane. Also keep the cool-roof pigment on the same clause.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the current sheet, then the calculadora.
