Inicio / Conocimiento / OS10 car park pavimento with Rayston Floor PUA 30 PARK
OS10 car park pavimento with Rayston Floor PUA 30 PARK
Notas de ingeniería. No un blog. OS10 car park pavimento is a clase de protección de hormigón fisurado. No es un polyaspartic-only PAS 10 card.
Write OS10 car park pavimento as a surface-protection class, not as a colour. Krypton magazine NUM.5 (October 2025) puts OS10 on Rayston Floor PUA 30 PARK. The named rehab is a car park in central Oslo. Therefore the specifier cites DAfStB and the named coats together.
What OS10 car park pavimento actually declares
NUM.5 describes OS10 as a surface protection system under TR Instandhaltung, regulated by the DAfStB directive. It is written for cracked concrete in high-traffic car parks. Puenteo de fisuras is classed IVT+V in the DAfStB guide. The magazine also cites DIN 1504-2, fire Bfl-s1, and protection against salts, fuel, oil and water. Catalogue 2024 already lists Rayston Floor D50 FR (proyectado en caliente poliurea pavement with fire resistance) and Rayston Floor D40 FR with Bfl-s1.
The Oslo build is Imprimación Epoxi 100 plus Rayston Floor D50 FR plus Kryptanate 100 LV (low-viscosity polyaspartic). NUM.5 cites fast cure, gloss retention, adhesion and low-temperature resistance. This is not Rayston Floor PAS 10. PAS 10 is Kryptanate M only. Keep the OS10 mark on PUA 30 PARK.
However, IVT+V is a class. It is not a kilogram rate. Read thickness from the current TDS. Also, do not invent kg/m².
Cómo especificar OS10 car park pavimento
First, name cracked-concrete parking traffic. Then name Imprimación Epoxi 100, Rayston Floor D50 FR and Kryptanate 100 LV. After that, cite OS10, DAfStB IVT+V and Bfl-s1 as the magazine prints them. In addition, size the area on the calculadora.
See Rayston Floor D50 FR, Kryptanate 100 LV, Imprimación Epoxi 100, indoor and outdoor parking, car park roofs, and documents. Area: calculadora.
Outbound reference: DIN — DIN 1504-2.
A yellow bay marking is not the class. Keep OS10 car park pavimento on Rayston Floor PUA 30 PARK.
Therefore the current TDS remains the source for mix and overcoat. First name the class. Next name the three coats. After that open documents. Also keep PAS 10 off this clause.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the ficha vigente, then the calculadora.