RAYSTON SPRAY ROBOT: a polyurea car park floor back in service in 8 hours
Reviewed by: Krypton Chemical Product Management
A car park that runs every day cannot close for days to get a new floor. On this project in Spain, RAYSTON SPRAY ROBOT sprayed Rayston Floor D50 FR over an outdoor parking deck, the surface was finished with aliphatic Kryptanate 100 FLEX, and the car park reopened to traffic in 8 hours. At Krypton Chemical we manufacture both the robot and the materials, and this is how the whole system works.
Outdoor car park — Spain
01 · What RAYSTON SPRAY ROBOT is
A floor spraying robot manufactured by Krypton Chemical
RAYSTON SPRAY ROBOT is an automated spraying unit that drives across the floor and carries the spray gun on a transverse rail, laying down strip after strip at the same speed, height and overlap from the first pass to the last. We designed it at Krypton Chemical to work with standard hot-spray units, low-pressure equipment and airless machines, so contractors can run it with the machine they already own.






The build is simple, with few moving parts, which keeps spare parts and maintenance to a minimum. The frame is lightweight aluminium, so it is highly manoeuvrable and simple to use, and with few moving parts the spares you need to keep are kept to a minimum. The robot does not replace the certified applicator: the applicator runs the job, sets the machine and checks thickness, while the robot does the repetitive spraying.
| Maximum spray width | 3.10 m (122 in) |
|---|---|
| Rail length | 3.25 m (128 in) |
| Longitudinal speed | continuously adjustable, 0–8 km/h |
| Gun speed on the boom (cross direction) | continuously adjustable |
| Gun height above floor | 0.6–1.2 m |
| Gun angle | variable |
| Frame | lightweight aluminium, few moving parts |
| Compatibility | standard hot-spray units, low-pressure equipment, airless machines |
| Output | up to 1,500 m² per day per crew and machine |
| Slopes | up to 10% |
| Dimensions | 200 × 90 × 76 cm |
| Weight | 280 kg |
Source: RAYSTON SPRAY ROBOT page of the Krypton Chemical 2026 catalogue (p. 72) and the Krypton Chemical Italia polyurea catalogue (pp. 36–37). Output figure from the Krypton Chemical waterproofing systems brochure (p. 15).
02 · How it works
How does the robot spray a car park floor?
The robot moves forward over the slab at a speed set by the applicator, while the gun travels across the rail, covering a strip up to 3.10 m wide on each pass. With speed, height and angle held constant, the spray pattern stays uniform and the thickness stays even across the whole area.
The gun design reduces spray mist, and the electrostatic system means less contamination from that mist, so material ends up on the floor rather than in the air and the site stays cleaner. Gun speed along the boom (cross direction) is continuously adjustable and the gun angle can be varied, which gives the applicator accurate thickness control for each product and project. Because the robot works on slopes up to 10%, ramps and sloped parking decks are part of the same job.
With Rayston Floor D50 FR specifically, application is with 2-component hot-spray equipment: component A at 65–70 °C, component B at 70–75 °C, hose at 70 °C, pressure 130–150 bar, and 2–3 kg/m² as a rule. Gel time of the mix is 8–10 s at 25 °C, which is exactly why steady, repeatable passes matter.
Application values from the Rayston Floor D50 FR technical data sheet.
03 · Comparison
What changes compared with hand spraying?
With hand spraying, thickness depends on the operator: hand speed, gun height and overlap change from pass to pass, and the membrane thickness changes with them. On a large parking deck, that means thin spots in some areas and wasted material in others.
Even thickness
Constant speed, height and overlap on every square metre, which is what the data sheet asks you to check during application.
Less mist, less contamination
The gun design reduces spray mist, and the electrostatic system reduces contamination from it.
Up to 1,500 m² a day
The robot raises application output to up to 1,500 m² per day per crew and machine, with a 3.10 m pass and up to 8 km/h.
Ramps included
Works on slopes up to 10%, so ramps and sloped decks get the same system.
Light and low-maintenance
Lightweight aluminium, highly manoeuvrable, few moving parts and few spares.
Same quality all day
The robot does not get tired: it works as well late in the afternoon as early in the morning, in hot or cold weather, and electronic control helps avoid polyurea overconsumption.
Works with your machine
Compatible with standard hot-spray units, low-pressure equipment and airless machines.
04 · System layers
The car park floor system, layer by layer
The system on this project is our outdoor car park build-up based on Rayston Floor D50 FR polyurea membrane with a Kryptanate 100 FLEX polyaspartic finish. Our channel shows the same build-up under the name RAYSTON FLOOR PUA PARK on an earlier outdoor parking project.
01 · Substrate preparation
Concrete is prepared mechanically by shot blasting, scarifying or diamond grinding to open the pores, then vacuumed. The substrate must be flat, cohesive (pull-off at least 1.5 N/mm²), clean and dry, with moisture below 4%, ambient humidity below 85% and substrate temperature between 10 and 40 °C. Porous substrates need a suitable primer before D50 FR to avoid bubbles and open pores.
02 · Rayston Floor D50 FR, sprayed by the robot
A 2-component hot-spray polyurea that cures into a hard flooring membrane with fire-resistant properties. RAYSTON SPRAY ROBOT sprays it as one continuous, seamless layer with no joints or laps; the required thickness is usually reached in a single coat.
| Hardness | 50 Shore D |
|---|---|
| Elongation at break | 300% |
| Tensile strength | 21 MPa (EN ISO 527-3) |
| BCA wear resistance | 10 µm (UNE EN 13892-4) |
| Impact resistance | >24.5 Nm (UNE EN ISO 6272) |
| Bond strength | 3.8 N/mm² (UNE EN 13892-8) |
| Reaction to fire | Bfl-s1, EN 13501-1:2018 |
| Certificates | OS 10; CE marking to EN 13813 |
| Vehicular traffic | possible after 4–5 hours |
| Top coat | can be applied after 60 minutes |
03 · Kryptanate 100 FLEX
A flexible, aliphatic, solvent-free polyaspartic finish with 100% solids. Being aliphatic it does not yellow in sunlight, which matters outdoors because aromatic polyureas change colour under the sun. It is applied by roller or spreader (spraying is not recommended); recommended thickness starts at 250 g/m².
| Hardness | 40–45D colourless, 50–55D pigmented (ISO 868) |
|---|---|
| Maximum elongation | 180% colourless, 125% pigmented |
| Tensile strength | 6 MPa colourless, 9 MPa pigmented (EN ISO 527-3) |
| Tear strength | 100 N/mm (ISO 34-1) |
| Gloss | 80–90% at 60° |
| Touch-dry | 75 min at 21 °C / 35% RH; 2.5 h at 10 °C / 60% RH |
| Return to service | light traffic usually one hour after touch-dry |
Values from the Rayston Floor D50 FR and Kryptanate 100 FLEX technical data sheets; typical values that depend on site conditions.
The layers
- Mechanical preparation of the concrete
- Rayston Floor D50 FR, robot-sprayed
- Kryptanate 100 FLEX aliphatic topcoat
In this system
- RAYSTON SPRAY ROBOT
- Rayston Floor D50 FR: Bfl-s1, OS 10, CE EN 13813
- Kryptanate 100 FLEX: non-yellowing in sunlight
- Outdoor car parks and slopes up to 10%
05 · The project
The car park in Spain: from preparation to traffic in 8 hours
The project is an outdoor car park floor in Spain. RAYSTON SPRAY ROBOT sprayed Rayston Floor D50 FR automatically, with no hand spraying, Kryptanate 100 FLEX was applied as the finish, and the car park was open to traffic again in 8 hours.
The 8-hour figure comes from the project itself, as stated in the title and description of the video on our channel; it is not a generic data sheet value. The data sheets give the partial times: vehicular traffic on D50 FR after 4–5 hours, top coat after 60 minutes, and Kryptanate 100 FLEX touch-dry in 75 minutes at 21 °C with light traffic one hour later. The real programme on any site depends on temperature, humidity and the condition of the concrete.
| Project | Outdoor car park floor coating |
|---|---|
| Location | Spain |
| Application | RAYSTON SPRAY ROBOT |
| Products | Rayston Floor D50 FR + Kryptanate 100 FLEX |
| Back in service | 8 hours (project data) |
| Manufacturer | Krypton Chemical (Rayston) |
Where else has the robot been used?
This is not the robot’s first job. The 6,000 m² deck of the Colmenar motorway bridge over the M-40 in Madrid was waterproofed with RAYSTON SPRAY ROBOT. Our channel also has a 2021 video of the RAYSTON FLOOR PUA PARK system being sprayed by the robot on another outdoor car park, where the time from substrate preparation to opening was also 8 hours. Krypton Chemical gives customers technical advice, on site when needed, to put this technology to work. Read about the M-40 bridge in Colmenar with Impermax Polyurea H Flex.
Read more on car park floors: OS10 car park flooring with Rayston Floor PUA 30 PARK, Rayston Floor D50 FR polyurea, outdoor parking and parking ramps.
06 · Data sheets
Technical documents
- Rayston Floor D50 FR technical data sheet (PDF)
- Kryptanate 100 FLEX technical data sheet (PDF)
- Krypton Chemical 2026 catalogue, RAYSTON SPRAY ROBOT on p. 72 (PDF)
- Krypton Chemical waterproofing systems brochure, Colmenar project and output on p. 15 (PDF, Spanish)
- Krypton Chemical Italia polyurea catalogue, pp. 36–37 (PDF, Italian)
- All data sheets and documents
- Rayston systems
- Products
07 · FAQ
Frequently asked questions
Does the robot replace the applicator?
No. The certified applicator runs the job, sets the machine and checks thickness; the robot does the repetitive spraying at constant speed and overlap.
How wide does it spray per pass?
Up to 3.10 m, on a 3.25 m rail.
Can it work on ramps?
Yes, on slopes up to 10%.
Will it work with my spray machine?
It is designed for standard hot-spray units, low-pressure equipment and airless machines. Contact our technical office to confirm compatibility with your machine.
How fast was this car park back in use?
In 8 hours, according to the project data published with the video. The Rayston Floor D50 FR data sheet states vehicular traffic is possible after 4–5 hours.
Does the top coat turn yellow in the sun?
No. Kryptanate 100 FLEX is aliphatic and does not yellow on exposure to sunlight.
What is the fire classification of Rayston Floor D50 FR?
Bfl-s1 to EN 13501-1:2018; the product holds OS 10 certification and CE marking to EN 13813.
How many square metres a day can it spray?
Up to 1,500 m² per day per crew and machine, according to the Krypton Chemical waterproofing systems brochure. Real output depends on the layout, obstacles and product.
Has the robot been used on other projects?
Yes, including the 6,000 m² Colmenar bridge deck over the M-40 in Madrid and outdoor car parks with RAYSTON FLOOR PUA PARK.
Does the robot reduce contamination on site?
Yes. The gun design reduces spray mist and the electrostatic system reduces contamination from it.
Who manufactures the system?
Krypton Chemical manufactures both RAYSTON SPRAY ROBOT and the Rayston and Kryptanate materials, with factories in Spain and Egypt and companies in Italy, the UK and France.
Links
