Home / Knowledge / OS10 car park flooring with Rayston Floor PUA 30 PARK
OS10 car park flooring with Rayston Floor PUA 30 PARK

OS10 car park flooring is a protection class for cracked concrete. It is not the polyaspartic-only PAS 10 system.
Krypton magazine No. 5 (October 2025) reports OS10 with Rayston Floor PUA 30 PARK on the refurbishment of a car park in central Oslo. The specification therefore quotes DAfStB together with the named coats.
What OS10 car park flooring declares
Krypton Magazine No. 5 describes OS10 as a surface protection system under TR Instandhaltung, regulated by the DAfStB directive, for cracked concrete in high-traffic car parks. Crack-bridging is classed IVT+V in the DAfStB guide. The magazine also cites DIN 1504-2, fire class Bfl-s1, and protection against salts, fuel, oil and water. The 2026 Krypton Chemical catalogue lists Rayston Floor D50 FR (hot-spray polyurea pavement with fire resistance) and Rayston Floor D40 FR with Bfl-s1.
The Oslo build-up is Primer Epoxy 100 plus Rayston Floor D50 FR plus Kryptanate 100 LV (low-viscosity polyaspartic). Krypton Magazine No. 5 highlights fast curing, gloss retention, adhesion and low-temperature resistance. This is not Rayston Floor PAS 10, which uses Kryptanate M only.
IVT+V is a class, not a consumption rate. Thickness is given in the current TDS.
Specifying OS10 car park flooring
Describe the cracked-concrete parking traffic, then specify Primer Epoxy 100, Rayston Floor D50 FR and Kryptanate 100 LV, quoting OS10, DAfStB IVT+V and Bfl-s1 as reported in the magazine. The calculator then helps you size the area.
Details are on the Rayston Floor D50 FR, Kryptanate 100 LV and Primer Epoxy 100 product entries and the indoor and outdoor parking and car park roofs application pages. Data sheets are in documents, and the area can be sized with the calculator.
External reference: DIN — DIN 1504-2.
Bay markings are not the protection class; the system is.
Mix ratio and overcoat interval come from the current TDS. State the class first, then the three coats.
This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.
