Underground car park at Jorge Newbery with Polyurea H Flex

Home / Knowledge / Underground car park at Jorge Newbery with Polyurea H Flex

Underground car park at Jorge Newbery with Polyurea H Flex

Underground car park with Polyurea H Flex cutaway: concrete slab, cream primer and grey membrane coved up a pillar

Impermax Polyurea H Flex in an underground car park is a named hybrid membrane on a buried deck, not a one-component roof coating.

For an underground car park, the relevant certification belongs to the membrane designed for movement. Krypton magazine No. 5 (October 2025) reports the waterproofing of the 11,000 m² underground car park at Jorge Newbery Metropolitan Airport, Buenos Aires, built on land reclaimed from the Río de la Plata. Primer Epoxy 100 (two-component epoxy primer) was used on the concrete and Impermax Polyurea H Flex (hot-spray hybrid polyurea) as the membrane. A one-component system intended for pedestrian terraces is not a substitute.

01

What Impermax Polyurea H Flex covers in an underground car park

The 2026 Krypton Chemical catalogue lists EAD-030675 21/0740 for Impermax Polyurea H Flex on decks subject to movement.

An underground car park differs from a rooftop car park, where UV is the primary exposure. Where the catalogue calls for an aliphatic finish, the current TDS gives the details. Kryptanate M (polyaspartic) is a different parking-floor system, and Rayston Floor PUA 30 PARK is a different OS10 floor.

02

Specifying an underground car park deck

Describe the buried deck and its traffic, then name Primer Epoxy 100 and Impermax Polyurea H Flex together, with reference to the current documents. Once the data sheet has been checked, the calculator helps you size the area.

More information is on the Impermax Polyurea H Flex product entry and the car park roofs and indoor and outdoor parking application pages. Data sheets are in documents, and the calculator helps you size the area.

External reference: EOTA — ETAGs and EADs.

A buried slab has different requirements from a cool roof.

Mix ratio, overcoat interval and consumption come from the current TDS, and the calculator then turns them into quantities for your area.

This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.

Scroll to Top