Home / Knowledge / Sports court with Rayston Floor and Colodur Eco
Sports court with Rayston Floor and Colodur Eco

A Rayston Floor sports court is a sealed, colour-zoned surface on prepared concrete, not a stadium stand.
Krypton magazine No. 4 (December 2024) reports a 980 m² court in Cervelló, Barcelona, finished with Rayston Floor PU 20 W Sport.
The Rayston Floor sports court build-up

Cracks were treated with Rayston Flex 3040 and the surface was primed with Primer Epoxy 100 (epoxy primer). Several coats of pigmented Colodur Eco (two-component aliphatic polyurethane finish) were then applied to mark out the sports areas, and a transparent Colodur Eco sealed the court.
Athletics tracks use Rayston RCB binders, while indoor comfort floors use Pavisoft (flexible polyurethane self-leveller).
The colour layout says nothing about thickness; the build is given in the current TDS. Because the court is outdoors and exposed to UV, the aliphatic finish forms the body of this particular system.
Specifying a Rayston Floor sports court
Details are on the Colodur Eco and Primer Epoxy 100 product entries and the indoor and outdoor sports courts and sports areas application pages. Data sheets are in documents, and the area can be sized with the calculator.
External reference: CEN-CENELEC.
The overcoat interval is given in the current TDS. Specify the primer first, then the aliphatic coats.
This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.

