Home / Knowledge / Tiled pool finished in Paintchlore 2K over Polyurea Rayston
Tiled pool finished in Paintchlore 2K over Polyurea Rayston

Paintchlore 2K on a ceramic pool is a chlorinated-water finish over a named polyurea, not a generic pool paint.
Krypton magazine No. 3 (March 2023) reports the waterproofing of a leaking 110 m² private pool in Almansa, Albacete. Primer Epoxy 100 (two-component epoxy primer) was applied by airless, Polyurea Rayston (hot-spray 100% pure polyurea) formed the intermediate membrane, and Paintchlore 2K (two-component acrylic polyurethane hybrid, aliphatic isocyanate) was the finish.
What Paintchlore 2K is
The 2026 Krypton Chemical catalogue describes Paintchlore 2K as a highly cross-linked aliphatic hybrid. Once cured it forms a continuous coat with mechanical, UV and chemical resistance, including to salt water and chlorinated water, and it withstands continuous immersion, even in chlorinated water. It is always supplied coloured, and at least two crossed coats are needed to cover the previous layer. White is the colour that does not bleach under excess chlorine.
Paintchlore (one-component aliphatic polyurethane) is a different product. In this system Polyurea Rayston is the membrane body and Paintchlore 2K the finish. Consumption is given in the current TDS.
Specifying a Paintchlore 2K ceramic pool
Identify the existing ceramic as the substrate, specify Primer Epoxy 100 and Polyurea Rayston together, and add Paintchlore 2K as the chlorinated-water finish. Once the current TDS has been checked, the calculator helps you size the area.
Details are on the Paintchlore 2K and Polyurea Rayston product entries and the swimming pools application page. Data sheets are in documents, and the calculator helps you size the area.
External reference: CEN-CENELEC — EN 1504-2.
The pool colour is a finish choice, not a specification; the applicator should work from the current data sheet.
Consumption, mix ratio and overcoat interval are given in the TDS. Start with the current documents, choose the primer, then specify the membrane and the finish together.
This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.
