Water channel lining with Impermax Aqua 2K

Home / Knowledge / Water channel lining with Impermax Aqua 2K

Water channel lining with Impermax Aqua 2K

Outdoor royal-blue Impermax Aqua 2K channel beside a grey stone wall, gravel walk and trees

Impermax Aqua 2K on a water channel is a solvent-free, cold-applied lining for fountain runs, basins and landscaped channels. It is not an indoor shower system and not a chlorinated pool finish.

Impermax Aqua 2K (solvent-free two-component polyurethane) is used where the lining stays wet. The 2026 Krypton Chemical catalogue describes it as fully stable in contact with water, even when submerged. A public channel or fountain is treated as a water-feature lining. Indoor kitchens, bathrooms and showers are covered in the indoor Aqua 2K article, chlorinated immersion in the Paintchlore 2K article, and drinking-water tanks in the WRAS article.

01

Where Impermax Aqua 2K is used on water channels

The channel lining is cold-applied and solvent-free. Impertrans Eco (water-borne aliphatic polyurethane topcoat) is the finish the 2026 catalogue pairs with solvent-free membranes when the lining is left exposed. Mix ratio, overcoat interval and consumption are given in the current TDS; then use the calculator.

A landscaped channel is not a WRAS reservoir, a ceramic pool or a kitchen wet room.

02

Specifying Impermax Aqua 2K on a water channel

Describe the channel, fountain or basin as a water feature, then specify Impermax Aqua 2K (solvent-free two-component polyurethane), with the solvent-free finish if the lining is exposed. Once the data sheet has been checked, the calculator helps you size the area.

Related information is on the Impermax Aqua 2K product entry and in the articles on indoor wet rooms Aqua 2K, WRAS-approved lining for drinking-water reservoirs and the Paintchlore 2K ceramic pool, with data sheets in documents. The official product page is Impermax Aqua 2K, and the calculator helps you size the area.

Scroll to Top