ETAG 033 bridge deck with Impermax Polyurea H Flex

Home / Knowledge / ETAG 033 bridge deck with Impermax Polyurea H Flex

ETAG 033 bridge deck with Impermax Polyurea H Flex

Applicators hot-spraying a grey-blue polyurea membrane on a concrete bridge deck with curved parapet walls

A bridge deck to ETAG 033 uses a named hybrid polyurea kit, not a generic spray coating.

ETAG 033 certification applies to the membrane that carries it. Krypton magazine No. 4 (December 2024) reports Impermax Polyurea H Flex (hot-spray hybrid polyurea) on the Guadalmez–Córdoba railway section in Andalusia, covering 30,000 m². A roofing ETA cannot be used in its place.

01

What the ETAG 033 certification covers

According to Krypton Magazine No. 4, Impermax Polyurea H Flex is certified with an ETE for bridge-deck waterproofing to ETAG 033, certificate 16/0149, with a 25-year service life. The 2026 Krypton Chemical catalogue also lists EAD-030675-00-0107 (nº 21/0740) for the same product on decks subject to movement.

Krypton Magazine No. 5 (October 2025) describes the same hybrid in the Rayston Proof Bridge system, Primer Epoxy 100 plus Impermax Polyurea H Flex, at Gran Faw Port, Alfaw, over 25,000 m². Fast curing speeds up the work on site, but the primer is still required.

ETAG 033 covers a bridge-deck kit. It does not apply to a pedestrian terrace or a cool roof.

Grey slip-resistant polyurea coating on a long concrete deck with coved parapets and drainage scuppers
02

Specifying an ETAG 033 bridge deck

Name Impermax Polyurea H Flex together with its chemical type, quote ETE 16/0149 as given in the magazine, and add Primer Epoxy 100 where the substrate is concrete. Thickness comes from the current TDS, after which the calculator helps you size the area.

Details are on the Impermax Polyurea H Flex and Primer Epoxy 100 product entries and the bridge decks application page. Data sheets are in documents, and the area can be sized with the calculator.

External reference: EOTA — ETAGs and EADs.

A railway photograph does not replace the product data sheet.

Mix ratio and overcoat interval come from the current data sheet. Describe the deck first, then specify the kit.

This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.

Scroll to Top