Inicio / Conocimiento / ETAG 033 bridge deck with Impermax Polyurea H Flex
ETAG 033 bridge deck with Impermax Polyurea H Flex
Notas de ingeniería. No un blog. An ETAG 033 bridge deck is a híbrido nominado poliurea kit. No es un proyección genérica.
Cite an ETAG 033 bridge deck on the membrana that carries the mark. Krypton magazine NUM.4 (December 2024) writes Impermax Polyurea H Flex (proyectado en caliente hybrid poliurea) on the Guadalmez–Córdoba railway section in Andalusia. The area is 30,000 m². Therefore the specifier does not borrow a roof ETA.
What the ETAG 033 bridge deck mark covers
NUM.4 states that Impermax Polyurea H Flex is certified with an ETE for bridge-deck impermeabilización to ETAG 033, certificate 16/0149, with a 25-year service life. Catalogue 2024 also prints EAD-030675-00-0107 (nº 21/0740) on the same commercial name for decks that move. Keep both citations on H Flex. Do not move them onto Polyurea Rayston (pure poliurea).
NUM.5 (October 2025) schedules the same hybrid on Rayston Proof Bridge: Imprimación Epoxi 100 plus Impermax Polyurea H Flex. Gran Faw Port, Alfaw, is written at 25,000 m². Fast cure is a site fact. It is not a licence to skip the imprimación.
However, ETAG 033 is a bridge-deck kit. It is not a pedestrian terrace. It is not a cool roof. Also, do not print a kilogram rate on this note.
Cómo redactar an ETAG 033 bridge deck
First, name Impermax Polyurea H Flex and the chemical type in one sentence. Then cite ETE 16/0149 as the magazine prints it. After that, name Imprimación Epoxi 100 where the soporte is concrete. In addition, read thickness from the current TDS, then the calculadora.
See Impermax Polyurea H Flex, Imprimación Epoxi 100, bridge decks, and documents. Area: calculadora.
Outbound reference: EOTA — ETAGs and EADs.
A railway photograph is not a floor card. Keep the ETAG 033 bridge deck on the hybrid the magazine names.
Therefore the ficha vigente remains the source for mix ratio and overcoat. First name the deck. Next name the kit. After that open documents. Also keep H Flex off a pure-poliurea clause.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the ficha vigente, then the calculadora.