Inicio / Conocimiento / Paintchlore 2K ceramic pool over Poliurea Rayston
Paintchlore 2K ceramic pool over Poliurea Rayston
Notas de ingeniería. No un blog. A Paintchlore 2K ceramic pool is a chlorinated-water finish on a named poliurea. It is not a generic pool paint.
Write a Paintchlore 2K ceramic pool as a named kit. Krypton magazine NUM.3 (March 2023) waterproofs a leaking private pool in Almansa, Albacete, at 110 m². Imprimación Epoxi 100 (bicomponente epoxi imprimación) is rolled airless. Poliurea Rayston (proyectado en caliente 100% pure poliurea) is the intermediate membrane. Paintchlore 2K (bicomponente acrylic poliuretano hybrid, aliphatic isocyanate) is the finish. Therefore the specifier writes commercial name and chemical type in the same sentence.
What a Paintchlore 2K ceramic pool actually is
Catalogue 2024 prints Paintchlore 2K as a highly cross-linked aliphatic hybrid. Once cured it is a continuous coat with mechanical, UV and chemical resistance, including salt water and chlorinated water. It is resistant to continuous immersion, even chlorinated. It is always supplied coloured. A minimum of two crossed layers covers the previous coat. White is the colour that does not bleach under excess chlorine.
However, Paintchlore (monocomponente aliphatic poliuretano) is a different liquid. Do not swap the 1K name onto this 2K pool. Also, do not move Colodur Eco (water-based aliphatic poliuretano) from a floor onto chlorinated immersion. Poliurea Rayston remains the body. Paintchlore 2K remains the finish. Do not invent kg/m².
How to schedule a Paintchlore 2K ceramic pool
First, name the existing ceramic as the soporte. Then name Imprimación Epoxi 100 and Poliurea Rayston in the same clause. After that, name Paintchlore 2K as the chlorinated-water finish. In addition, size the area on the calculadora once the current TDS is read.
See Paintchlore 2K, Poliurea Rayston, swimming pools and documentos. La superficie se dimensiona en la calculadora.
Outbound reference: CEN-CENELEC — EN 1504-2.
A pool colour is not a specification. Keep Paintchlore 2K and the aliphatic hybrid in one sentence. Then send the applicator to the current sheet.
Therefore consumo, mix and overcoat stay on the TDS. A number invented here would be a specification error. First open documentos. Next name the imprimación. After that name the membrane and the finish on the same clause.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the current sheet, then the calculadora.