Home / Knowledge / Ibiza wastewater treatment plant lined with Rayston Spray D50
Ibiza wastewater treatment plant lined with Rayston Spray D50

At the wastewater treatment plant (WWTP) in Sant Antoni de Portmany, Ibiza, Rayston Spray D50, a hot-spray membrane, was used as the waterproofing layer.
Rayston Epoxy 100 (solvent-free epoxy primer) was used as the primer and grey Colodur (single-component aliphatic polyurethane topcoat) as the sealer. A tank lining has very different requirements from a pedestrian terrace.
How the lining was built up
Rayston Epoxy 100 (solvent-free epoxy primer) was applied to the wastewater substrate for adhesion. Rayston Spray D50 (hot-spray membrane), which Catalogue 2026 lists for WWTPs, tanks and biogas, was then sprayed hot to form a continuous, elastic waterproof layer. Pigmented grey Colodur was applied as the sealer against UV, abrasion and wear.
For consumption, read the current data sheet, then use the calculator.
Specifying Rayston Spray D50 for a WWTP
The specification should cover the chemical exposure and call for a joint-free lining. The grey Colodur is a sealer, not the waterproofing.
See also digesters and WWTPs, purification plants and products. Data sheets are in Documents.
Project page: kryptonchemical.com — WWTP in Ibiza.
Outbound reference: EOTA.
This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.




