Tenerife stands Polyurea Rayston

Home / Knowledge / Tenerife La Suerte stands Polyurea Rayston

Tenerife La Suerte stands Polyurea Rayston

Tenerife stands Polyurea Rayston

The 800 m² of stands at La Suerte Stadium in Los Realejos, Tenerife, were waterproofed with Polyurea Rayston (100% pure polyurea) and finished with anti-slip pigmented Colodur.

Stadium stands face UV, ponding water and foot traffic, which is very different from a gym floor. The specification should name Polyurea Rayston and Colodur (one-component aliphatic polyurethane) together.

01

How the stands were waterproofed

Magazine No. 4 describes the sequence as diamond grinding, then Primer Epoxy 100 (two-component solvent-free epoxy primer), then Polyurea Rayston, then pigmented Colodur with an anti-slip finish. Polyurea Rayston carries CE EN-1504-2, ETA ETAG005 16/0148, BBA 18/5582 and WRAS BS6920. Because the stands are exposed to UV, the aliphatic topcoat is required. Catalogue 2026 also allows Colodur with an anti-slip additive on stadium stands.

For consumption, read the current TDS, then use the calculator.

See also Polyurea Rayston on football stadium stands, Primer Epoxy 100 and documents.

External reference: EOTA — European Technical Assessments.

In the specification, list the diamond grinding first, then Polyurea Rayston, then anti-slip pigmented Colodur.

This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.

Scroll to Top