Home / Knowledge / Stadium spectator terraces
Stadium spectator terraces

Stadium spectator terraces are a waterproofing application, not a sports floor. The 2026 Krypton Chemical catalogue specifies Rayston Fire E (aliphatic fire-rated finish, Euroclass Bs2d0) for bleachers, so a terrace is not a Rayston Floor application.
The system for stadium spectator terraces
The membrane may be Polyurea Rayston (pure polyurea) or another named hot-spray product where the application page specifies it, with Rayston Fire E as the fire-rated finish. Euroclass Bs2d0 is the classification the 2026 catalogue gives for that product. The primer depends on the substrate and is given in the current TDS.
Reference projects from the catalogues include Nastic Stadium, Tarragona (16,000 m²) and Levante UD (30,000 m²). Consumption is given in the current TDS.
Pavifloor / Pavisoft (resin floor body) is a floor body and does not waterproof a bleacher. Colodur Eco is a floor finish, not a substitute for Rayston Fire E.
Where to find the details
The football stadium stands application and the spectator terraces system page describe the full build-up. Take consumption from the current TDS, then use the calculator.
See the football stadium stands application page, the system for spectator terraces, and the Rayston Fire E and Polyurea Rayston product entries.
External reference: EOTA.
A stand needs a waterproofing system, not a sports floor.
Mix ratio, overcoat interval and consumption always come from the current TDS, and the calculator then turns them into quantities for your area. The application page shows the full system build-up. A sound specification starts with the exposure, names the commercial product together with its chemical type, and refers to the current documents. A sample, a colour chip or a photograph cannot replace that wording.
This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.

