Home / Knowledge / Cool roof on a sports pavilion with Polyurea Rayston
Cool roof on a sports pavilion with Polyurea Rayston

The roof of a sports pavilion was waterproofed with Polyurea Rayston, a hot-spray 100% pure polyurea membrane.
Krypton ProLine PU AL Primer (one-component polyurethane aluminium primer) was used on the pipework, Polyurea Activating Primer across the roof area, and white Colodur (single-component aliphatic polyurethane topcoat) as the cool-roof sealer.
How the roof was built up
The old waterproofing was mechanically sanded and cleaned with high-pressure water. Krypton ProLine PU AL Primer was applied to the pipes and detail areas, and Polyurea Activating Primer across the rest of the roof. Polyurea Rayston was then sprayed as the continuous waterproof layer, with white Colodur as the solar-reflective sealer.
Catalogue 2026 lists Polyurea Rayston for roofs and Colodur as an aliphatic topcoat. A hybrid polyurea should not replace the pure polyurea in this build unless the change is agreed in writing. For consumption, read the current data sheet, then use the calculator.
How to specify a sports-pavilion cool roof
Specify the pipe primer, the roof primer, the hot-spray pure polyurea and the white aliphatic sealer as four separate items. Krypton ProLine PU AL Primer is for metal pipework, not for the main roof area. White Colodur is a finish, not the waterproofing.
See also cool roofs, school sports halls, metal roofs and products. Data sheets are in Documents.
Project page: kryptonchemical.com — cool roof at a sports pavilion.
Outbound reference: EOTA.
This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.




