Resin floor classes by traffic

Home / Knowledge / Resin floor classes by traffic

Resin floor classes by traffic

Beige seamless resin floor in a glass courtyard with wood door, resin floor classes by traffic

Resin floors are chosen by traffic, not by sample. Industrial, parking and sports floors each combine a primer, a body and a finish, so a chip on a sample board is not a specification.

01

How resin floor classes are built

Primer Epoxy 100 is the epoxy primer for prepared concrete in the Krypton Chemical catalogue. Pavifloor / Pavisoft (resin floor body) is the self-levelling polyurethane body for indoor work, and Colodur Eco (aliphatic finish) is the UV-stable topcoat it requires. EP Nivel is the epoxy self-leveller for dry indoor areas with high mechanical wear.

Industrial and warehouse floors follow this primer–body–finish build-up. Indoor and outdoor parking adds abrasion and tyre chemistry. Sports courts use a different body, and athletics tracks use Rayston RCB-580 / RCB-581 (PU binders for SBR cushion / EPDM wear). Stadium stands are a waterproofing application.

Rayston Floor D50 FR and D40 FR are hot-spray floor systems, not Pavifloor. Kryptanate 100 is a high-reactivity finish, not a body. Consumption figures come from the current TDS.

02

What the specification should include

Start from the traffic, then name the primer, body and finish. Take consumption from the current TDS and use the calculator for quantities.

Further details are on the application pages for industrial flooring, indoor and outdoor parking, sports courts and athletics tracks, and on the Pavifloor and Colodur Eco product entries.

External reference: CEN-CENELEC — EN 1504-2.

A sample board does not define the primer, body and finish; the traffic does.

Mix ratio, overcoat interval and consumption always come from the current TDS, and the calculator then turns them into quantities for your area. The application page shows the full system build-up. A sound specification starts with the exposure, names the commercial product together with its chemical type, and refers to the current documents. A sample, a colour chip or a photograph cannot replace that wording.

This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.

Scroll to Top