Rayston Proof Foam Aluminium on an irregular roof

Home / Knowledge / Rayston Proof Foam Aluminium on an irregular roof

Rayston Proof Foam Aluminium on an irregular roof

Rayston Proof Foam Aluminium

Rayston Proof Foam Aluminium combines spray foam with a hybrid polyurea membrane. It is intended for low-traffic roofs, not terraces.

Rayston Proof Foam Aluminium provides insulation and waterproofing together. Krypton magazine No. 5 (October 2025) reports its use at the French Embassy in Athens, with Rayston Spray Foam 50W plus Impermax Polyurea H Flex (hot-spray hybrid polyurea). Both layers are specified.

01

What Rayston Proof Foam Aluminium covers

Krypton Magazine No. 5 describes it as the option for large roofs with irregular supports and little traffic. The 2026 Krypton Chemical catalogue lists Rayston Spray Foam 8W / 30W / 40W / 50W among its polyurethane insulating foams, and the membrane in this system is Impermax Polyurea H Flex. The magazine cites ETE 16/149 and asbestos encapsulation to UNI 10686:1998 for the system.

This is not Polyurea Rayston X5 (expandable polyurea), even though the catalogue also recommends X5 for irregular decks and asbestos; specify the commercial system used on the project. Low traffic does not make a pedestrian terrace. Where encapsulation is the declared use, refer to the asbestos application.

Foam thickness is a thermal requirement and membrane thickness a waterproofing requirement. Both are given in the current TDS.

02

Specifying Rayston Proof Foam Aluminium

Describe the irregular, low-traffic roof, then specify Rayston Spray Foam 50W and Impermax Polyurea H Flex together, quoting ETE 16/149 and UNI 10686:1998 as reported in the magazine. Once the data sheets have been checked, the calculator helps you size the area.

Details are on the Impermax Polyurea H Flex product entry and the thermal and acoustic insulation of roofs, asbestos encapsulation and industrial roofs application pages. Data sheets are in documents, and the area can be sized with the calculator.

External reference: EOTA — European Technical Assessments.

A photograph of the skyline says nothing about thickness.

Consumption is given in the current data sheets. Specify the foam first, then the hybrid polyurea.

This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.

Scroll to Top