Home / Knowledge / Commercial kitchen floor with Rayston Floor PU 30, Pavifloor and Colodur
Commercial kitchen floor with Rayston Floor PU 30, Pavifloor and Colodur

Rayston Floor PU 30 in a kitchen is a named indoor floor system, not a playground safety surface.
Krypton magazine No. 5 (October 2025) reports an industrial kitchen in Germany coated over 1,500 m². Primer Epoxy 100 (two-component epoxy primer) was used as the primer, Pavifloor (self-levelling 100% solids polyurethane, solvent-free) as the body and Colodur (aliphatic polyurethane finish) as the topcoat.
Where Rayston Floor PU 30 is used
The 2026 Krypton Chemical catalogue lists Pavifloor for homes, warehouses, factories, garages, offices, bars, restaurants and rooms in hospitals and clinics. It is a semi-rigid indoor coating with abrasion and scratch resistance, and it requires an aliphatic topcoat, Colodur Eco (water-based aliphatic polyurethane) being the example in the data sheet. An industrial kitchen means cleaning chemicals and indoor traffic, not the exposure of a stadium stand.
Mix ratio and overcoat interval are given in the current TDS; then use the calculator.
Specifying a Rayston Floor PU 30 kitchen
Describe the kitchen as an indoor area with chemical cleaning, then specify Primer Epoxy 100, Pavifloor and Colodur together, with reference to the current documents. Once the data sheet has been checked, the calculator helps you size the area.
Details are on the Pavifloor and Colodur product entries and the hospitality and catering and agri-food flooring application pages. Data sheets are in documents, and the calculator helps you size the area.
External reference: CEN-CENELEC.
A photograph of a kitchen does not define the traffic class; the applicator should work from the current data sheet.
Mix ratio, overcoat interval and consumption come from the current TDS rather than from estimates.
This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.


