Home / Knowledge / Faw Port in Iraq with Rayston Proof Bridge
Faw Port in Iraq with Rayston Proof Bridge

25,000 m² at Gran Faw Port, Alfaw. Rayston Proof Bridge is the system name used in the magazine for Primer Epoxy 100 (two-component epoxy primer) plus Impermax Polyurea H Flex (hot-spray hybrid polyurea).
Rayston Proof Bridge was applied over 25,000 m² at Gran Faw Port, Alfaw, combining Primer Epoxy 100 (two-component epoxy primer) with Impermax Polyurea H Flex (hot-spray hybrid polyurea). Magazine No. 5 gives the area as 25.000 m², i.e. 25,000 m². On a motorway bridge, the membrane is this hybrid, not Polyurea Rayston (pure polyurea).
The Rayston Proof Bridge system
The magazine describes Epoxy 100 Primer followed by Impermax Polyurea H Flex. The 2026 Krypton Chemical catalogue lists CE marking for bridge-deck waterproofing and ETA EAD-030675-00-0107 (nº 21/0740) for the hybrid. The magazine also highlights hail resistance and fast curing to accommodate structural movement; application rates are given in the current TDS and the calculator.
The Colmenar M-40 bridge used the same hybrid over 6,000 m². Consumption is given in the current TDS; the calculator then helps you estimate quantities.
More on this application is on the bridge decks application page and the Impermax Polyurea H Flex and Primer Epoxy 100 product entries.
External reference: EOTA — ETAGs and EADs.
For a similar deck, specify Rayston Proof Bridge with the primer and the hybrid membrane in the same clause.
This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.

