Home / Knowledge / Gym floor in Italy with Paviflex
Gym floor in Italy with Paviflex

A 1,300 m² gym in Italy was finished with Paviflex, a flexible two-component polyurethane applied cold as the floor body.
Paviflex and the rubber mat beneath it belong in the same specification clause. A glossy finish says nothing about shock absorption.
How the Paviflex gym floor is built up
According to the magazine, the rubber mat is first fixed with PU 2K Adhesive (two-component polyurethane adhesive). Paviflex mixed with Rayston Thickener then seals the mat, and Paviflex is applied as the self-levelling body. The finish is Colodur Eco (water-based aliphatic polyurethane). The whole system is applied cold.
Magazine No. 3 also reports that Paviflex carries CE marking, a plant-origin carbon certificate, asbestos-encapsulation certification under the Ministry of Health Decree of 20/08/1999 and UNI 10686:1998, and an impact-noise reduction of −17 dB to UNE-EN ISO 10140. These certifications apply to Paviflex itself.
For consumption, read the current TDS, then use the calculator.
See also Paviflex gym flooring on sports areas, Colodur Eco and documents.
External reference: ISO 10140-1 — laboratory measurement of sound insulation.
In the specification, list the rubber mat first, then Paviflex, then the aliphatic finish.
This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.

