Mercat Sant Ildefons metal roof, Hospitalet
In 2019, Mercat Sant Ildefons metal roof, Hospitalet was made with Impermax Polyurea H Flex ALUM, Rayston Spray Foam HFO40.
01 · Project overview
What is this project?
In 2019, Mercat Sant Ildefons metal roof, Hospitalet was made with Impermax Polyurea H Flex ALUM, Rayston Spray Foam HFO40. Catalonia works a roof and a floor hard: sea air on the coast, a sharp swing between afternoon and night, and industrial towns that do not stop for a slow coating.
This one is metal roof waterproofing.
Impermax Polyurea H Flex ALUM is the spray coat on this roof, so the field and the details are one film. Rayston Spray Foam HFO40 is sprayed first, as the insulation, and the waterproofing goes over it.
The system named for this job is R Proof FOAM ALUMINIUM.
Krypton Chemical makes the resin. The crew on site applies it. On Mercat Sant Ildefons metal roof, Hospitalet the details have to get the same film as the open field, and the cure has to finish before the building goes back to work.
| Project | Mercat Sant Ildefons metal roof, Hospitalet |
|---|---|
| Place | España – Cataluña |
| Year | 2019 |
| Line | Waterproofing |
| Products | Impermax Polyurea H Flex ALUM, Rayston Spray Foam HFO40 |
02 · The challenge
What did this structure ask of the system?
A metal roof is a field of laps, fixings and ribs. Water does not come through the middle of a sound sheet. It comes through a lap that opens in the heat, or a fixing that was never sealed.
Mercat Sant Ildefons metal roof, Hospitalet has to follow those ribs. A coating that only covers the flat of the panel leaves the joint bare.
03 · The solution
Which system was trusted here?
The system trusted here is the one named for the job: Impermax Polyurea H Flex ALUM, Rayston Spray Foam HFO40. It is chosen because it matches the substrate and the exposure, not because every building wants the same can.
On a roof the membrane has to follow outlets and upstands at the same thickness as the field. An exposed aromatic film takes a topcoat if the colour will be seen.
04 · Application
How is the system built?
The products named for Mercat Sant Ildefons metal roof, Hospitalet are applied as one build-up, details before the field. Outlets, edges and changes of plane are closed first, with the same materials as the main area. A system that changes product at the difficult line is a system with a future peel.
The line is Impermax Polyurea H Flex ALUM, Rayston Spray Foam HFO40. The deck is dry, the temperature is inside the range that product allows, and the next coat follows while the window is open. Leaving a detail for the following week is how these jobs come back.
On Mercat Sant Ildefons metal roof, Hospitalet the roof fails at the edge long before it fails in the field. Parapets, outlets, plant plinths and laps are detailed first, with the same system, at the same thickness. A bay can be perfect and the ceiling still stains if the outlet was a collar of mastic.
The deck moves between the hot afternoon and the night. The membrane has to move with it. A rigid coat maps every crack in the substrate onto the ceiling. Thermal movement is the reason an elastic system is on a roof like this, not a preference for a particular can.
Where the film stays in the sun, colour and waterproofing are two layers. The membrane keeps the water out. An aliphatic coat keeps the appearance. Skipping the topcoat because the membrane is already waterproof is how a sound roof starts to look failed, and then gets recoated for the wrong reason.
05 · Results
What does a job like this stand behind?
Mercat Sant Ildefons metal roof, Hospitalet has one standard. The coating is still doing its job after the building is back in use, at the details as well as in the middle.
Figures for cure, thickness and strength, where they are given, come from the product data sheets. They are not a test cut out of this building.
What this asks of Mercat Sant Ildefons metal roof, Hospitalet is workmanship at the difficult line. The open field is the easy part of a resin job. Outlets, edges, penetrations and changes of plane are where thickness goes missing, and where water or wear finds the gap. The same products and the same care belong there, and the cure is allowed to finish before the building goes back into use. That is the difference between a coating that was simply applied and a system that stays in service.
06 · Products
Products on this job
Impermax Polyurea H Flex ALUM
Named on this project. The data sheet carries the application window and the typical figures.
Rayston Spray Foam HFO40
Named on this project. The data sheet carries the application window and the typical figures.
07 · FAQ
Frequently asked questions
Where is this project?
Mercat Sant Ildefons metal roof, Hospitalet. España – Cataluña
When was the work done?
2019.
Which products were used?
Impermax Polyurea H Flex ALUM, Rayston Spray Foam HFO40.
Why are the details done first?
Outlets, upstands and joints are where water gets in. They are closed with the same system as the main area.
Where do the cure times come from?
From the product data sheet. They describe the resin, not a clock stopped on this site.