Home / Knowledge / Rayston Floor PU 30 kitchen with Pavifloor and Colodur
Rayston Floor PU 30 kitchen with Pavifloor and Colodur
Engineer notes. Not a blog. A Rayston Floor PU 30 kitchen is a named indoor body. It is not a playground safety mat.
Write a Rayston Floor PU 30 kitchen as a named indoor system. Krypton magazine NUM.5 (October 2025) coats an industrial kitchen in Germany at 1,500 m². Primer Epoxy 100 (two-component epoxy primer) is the primer. Pavifloor (self-levelling 100% solids polyurethane, solvent-free) is the body. Colodur (aliphatic polyurethane finish) is the top coat. Therefore the specifier writes commercial name and chemical type in the same sentence.
Where a Rayston Floor PU 30 kitchen belongs
Catalogue 2024 prints Pavifloor for homes, warehouses, factories, garages, offices, bars, restaurants and rooms in hospitals and clinics. It is a semi-rigid indoor coating with abrasion and scratch resistance. It requires an aliphatic top coat — Colodur Eco (water-based aliphatic polyurethane) is the example the sheet names. An industrial kitchen is cleaning chemicals and indoor traffic, not a stadium stand.
However, do not move Rayston Floor PU 40 Safety (polyurethane safety flooring) from a playground onto this kitchen. Do not move Paintchlore 2K from a chlorinated pool onto this floor. Also, do not invent kg/m². Mix ratio and overcoat stay on the current TDS, then the calculator.
How to schedule a Rayston Floor PU 30 kitchen
First, name the kitchen as indoor chemical cleaning. Then name Primer Epoxy 100, Pavifloor and Colodur in the same clause. After that, open documents. In addition, size the area on the calculator once the sheet is read.
See Pavifloor, Colodur, hospitality and catering, agri-food flooring and documents. Area is sized on the calculator.
Outbound reference: CEN-CENELEC.
A kitchen photograph is not a traffic class. Keep Rayston Floor PU 30, Pavifloor and Colodur in one schedule. Then send the applicator to the current sheet.
Therefore the current TDS remains the source for mix, overcoat and consumption. A number invented here would be a specification error.
These notes do not replace the current TDS, SDS or a written specification. For pack sizes, mix ratio and kg/m², read the current sheet, then the calculator.
