Home / Knowledge / University of the Balearic Islands roof insulated with Rayston Spray Foam HFO 40
University of the Balearic Islands roof insulated with Rayston Spray Foam HFO 40

On a roof at the University of the Balearic Islands, Rayston Spray Foam HFO 40 (rigid two-component polyurethane foam) was used as the insulation.
Impermax H Flex (100% solids hot-spray hybrid polyurea membrane) provides the waterproofing and Colodur (single-component aliphatic polyurethane topcoat) the UV protection. The foam insulates; it is not the waterproofing membrane.
How the roof was built up
The deck was pressure-washed so the foam could bond. Rayston Spray Foam HFO 40 (rigid two-component polyurethane foam) was then sprayed as thermal insulation and a continuous base, followed by Impermax H Flex (100% solids hot-spray hybrid polyurea) as joint-free waterproofing. Colodur is the pigmented aliphatic finish.
Catalogue 2026 lists Rayston Spray Foam HFO 40 as a closed-cell rigid foam. Impermax Polyurea H Flex (hot-spray hybrid polyurea) is a different product and should not replace Impermax H Flex in this build unless the change is agreed in writing. For consumption, read the current data sheet, then use the calculator.
How to specify the UIB roof build
Specify the insulation and the waterproofing as separate products. A cool-roof colour is a finish, not the membrane.
See also thermal and acoustic insulation of roofs, public-building roofs and products. Data sheets are in Documents.
Project page: kryptonchemical.com — roof waterproofing at the Balearic Islands University.
Outbound reference: EOTA.
HVAC upstands should be included in the same waterproofing clause as the main roof area.
This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.




