Nursery school roof waterproofed with Impermax Polyurea H

Home / Knowledge / Nursery school roof waterproofed with Impermax Polyurea H

Nursery school roof waterproofed with Impermax Polyurea H

Aerial of a nursery-school building with a seamless light-grey-white flat roof, courtyard cut-out, brick walls and playground

The roof of a nursery school was waterproofed with Impermax Polyurea H, a hot-spray hybrid polyurea membrane.

Primer TP Flex was used on the aged bitumen, and white Colodur (single-component aliphatic polyurethane topcoat) as the UV sealer. A white roof is not a system in itself.

01

How the roof was built up

Primer TP Flex was applied to the existing bituminous surface for adhesion. Impermax Polyurea H (hot-spray hybrid polyurea), which Catalogue 2026 lists for roofs, parking decks and foam protection, was then sprayed hot as a continuous layer, and white Colodur was applied as the UV sealer. The project description also notes a reflective effect from the white finish.

For consumption, read the current data sheet, then use the calculator.

02

Specifying Impermax Polyurea H for a school roof

The specification should cover the aged bitumen, the hot-spray hybrid polyurea and an aliphatic sealer. White Colodur is a finish, not the waterproofing.

See also cool roofs, roofs, balconies and terraces and products. Data sheets are in Documents.

Project page: kryptonchemical.com — new roof waterproofing.

Outbound reference: EOTA.

Details such as the courtyard cut-out belong in the same membrane clause as the main roof area.

This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.

Scroll to Top