Home / Knowledge / Cool roof under photovoltaic panels in Italy with Impermax Plus
Cool roof under photovoltaic panels in Italy with Impermax Plus

On a flat roof in Italy carrying photovoltaic panels, the cool-roof build combines Impermax Plus, a one-component polyurethane system from the Impermax family, with Colodur Pigmented white (aliphatic polyurethane, SRI 105).
Impermax Plus is what the magazine calls this one-component polyurethane roof system, which was applied over the old asphalt. It is not a current catalogue product.
Re-using the old asphalt
The old asphalt felt no longer worked as a waterproofing membrane, so it was kept as the vapour barrier of the new system. This re-use is specific to the project; it is not a new product. Magazine No. 2 gives an SRI of 105 for Colodur Pigmented white, and the cool-roof finish keeps the panels running cooler.
Impermax Plus should not be confused with Impermax 2K (two-component hot-spray polyurethane). For consumption, read the current TDS, then use the calculator.
See also Impermax Plus on PV roofs, cool roofs and documents.
External reference: CEN-CENELEC.
In the specification, list the old asphalt as the vapour barrier first, then Impermax Plus, then Colodur Pigmented white.
This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.


