Home / Knowledge / Kitchens and showers waterproofed with Impermax Aqua 2K
Kitchens and showers waterproofed with Impermax Aqua 2K

Impermax Aqua 2K in indoor wet rooms is a solvent-free, cold-applied lining. It is not a chlorinated pool system and not a one-component roof coating.
For indoor wet rooms, Impermax Aqua 2K is used as a cold-applied, solvent-free lining. The 2026 Krypton Chemical catalogue lists solvent-free polyurethane and polyurea resins for kitchens, bathrooms and showers. Impermax Aqua 2K (solvent-free two-component polyurethane) remains fully stable in contact with water, even when submerged. The waterproofing catalogue cites indoor wet rooms in the Middle East of 80–100 m².
Where Impermax Aqua 2K is used indoors
Coverings may be left exposed with a solvent-free protective finish or protected with tiling. Impertrans Eco (water-borne aliphatic polyurethane topcoat) is the finish the 2026 catalogue pairs with solvent-free membranes. Impermax Evolution (low-odour hybrid moisture-activated polyurethane) is the 1K product also listed on the indoor page, and Porosity Sealer Flex (flexible polyurethane porosity sealer) is the primer.
A shower is not a swimming pool: Paintchlore 2K is the product for chlorinated immersion, and WRAS applies to drinking-water tanks. Mix ratio, overcoat interval and consumption are given in the current TDS; then use the calculator.
Specifying an indoor wet room
Identify the kitchen, bathroom or shower as an indoor area, name Impermax Aqua 2K (solvent-free two-component polyurethane) or Impermax Evolution as listed in the catalogue, and add the solvent-free finish or tiling. Once the data sheet has been checked, the calculator helps you size the area.
Details are on the Impermax Aqua 2K, Impermax Aqua and Impertrans Eco product entries and the indoor wet rooms application page. Data sheets are in documents, and the calculator helps you size the area.
External reference: CEN-CENELEC — EN 1504-2.
A tiled wet room has different requirements from a cool roof.
Consumption comes from the current TDS, not from estimates.
This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.
