Home / Knowledge / Impermax Aqua cool roof on a non-trafficable deck
Impermax Aqua cool roof on a non-trafficable deck

An Impermax Aqua cool roof is a white water-based membrane on a roof accessible for maintenance only. It is not a pedestrian terrace.
The Impermax Aqua cool roof is a non-trafficable system. Krypton magazine No. 4 (December 2024) reports the Hilton hotel, Mexico City, over 2,400 m², where the roof is accessed for maintenance only.
What an Impermax Aqua cool roof is

Impermax Aqua (water-based hybrid aliphatic polyurethane, 1K) is a membrane with CE marking to EN 1504-2 in the 2026 Krypton Chemical catalogue. In the magazine project it is pigmented white for the cool-roof effect. It is not Impermax A (moisture-curing aliphatic polyurethane), nor a hot-spray hybrid.
The system starts with cleaning. Rayston Flex 3040 is used for local defects and mesh reinforces selected areas. Humidity Primer LV (epoxy primer for residual moisture), listed in the magazine as Epoxy H LV Primer, is the primer, and Impermax Aqua then forms the waterproofing layer.
The cool-roof colour does not make the surface trafficable: Krypton Magazine No. 4 describes the Rayston system for non-trafficable roofs with maintenance access only.
Specifying an Impermax Aqua cool roof
Define the exposure as maintenance access only, then specify Humidity Primer LV and Impermax Aqua in a single clause. The white pigment is selected according to the current technical data sheet, and the calculator helps you size the area once the data sheet has been checked.
Details are on the Impermax Aqua and Humidity Primer LV product entries and the roofs, balconies and terraces application page. Data sheets are in documents, and the calculator helps you size the area.
External reference: CEN-CENELEC — EN 1504-2.
A white film alone is not a specification. State the trade name together with the chemical type, and refer the applicator to the current data sheet.
Consumption, mixing and recoat interval are given in the technical data sheet. Start with the current documents, then specify the primer and the membrane, with the cool-roof pigment in the same clause.
This article is general technical guidance from Krypton Chemical and does not replace the current technical data sheet (TDS), the safety data sheet (SDS) or the project specification. Pack sizes, mix ratio and consumption in kg/m² are given in the current TDS; with those figures, the calculator helps you estimate quantities for your area.

