Home / Knowledge / Dental clinic floor with Pavisoft
Dental clinic floor with Pavisoft

The floor of a dental clinic was laid with Pavisoft, a self-levelling, 100% solids polyurethane, as the floor body.
Tecnocem (epoxy-cement mortar) and Rayston Epoxy 100 (solvent-free epoxy primer) were applied beneath it. A colour sample on its own does not define the system.
How the floor was built up
Where the concrete held residual moisture, Tecnocem (epoxy-cement mortar) was used as the base. Rayston Epoxy 100 (solvent-free epoxy primer) then sealed the surface before the body coat, and Pavisoft (self-levelling 100% solids polyurethane) was applied as the comfort layer.
The sealer is Colodur Eco (two-component aliphatic polyurethane topcoat), applied in white, pink and satin transparent with an anti-slip additive. Catalogue 2026 lists Pavisoft for comfort flooring and Colodur Eco for resin floors.
Specifying Pavisoft for a clinic
The specification should reflect hygiene, impact and wet soiling, not a sports-court class. For consumption, read the current data sheet, then use the calculator.
See also hospitals, clinics and pharmacies, Rayston Floor PU 30 Flex and products. Data sheets are in Documents.
Project page: kryptonchemical.com — new flooring in a dental clinic.
External reference: CEN-CENELEC.
Colours such as the pink areas are a finishing choice; they do not replace the moisture-barrier clause in the specification.
This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.




