Home / Knowledge / Bound-stone paving at Camping La Ballena Alegre with Pavistone 2K UV
Bound-stone paving at Camping La Ballena Alegre with Pavistone 2K UV

At Camping La Ballena Alegre in Girona, Pavistone 2K UV (two-component polyurethane stone binder) was used for the wearing surface.
Rayston Prim PU 100 (solvent-free 100% solids polyurethane primer) was used as the primer, crushed marble as the aggregate and Floortop 1K (single-component aliphatic polyurethane topcoat) as the sealer. A marble sample does not tell you which binder is used.
How the surface was built up
After the outdoor substrate had been cleaned, Rayston Prim PU 100 was applied. Pavistone 2K UV was then mixed with the crushed marble and laid as a decorative, draining, wear-resistant surface, with Floortop 1K as the transparent sealer.
Catalogue 2026 lists Pavistone 2K UV for bound-stone floors with UV stability. For consumption, read the current data sheet, then use the calculator.
Specifying Pavistone 2K UV outdoors
List the primer, the UV-stable stone binder, the aggregate and the aliphatic sealer as four separate items. The lagoon edge is a detail, not a pool membrane.
See also Pavistone, decorative flooring, gardens and golf paths and products. Data sheets are in Documents.
Project page: kryptonchemical.com — Camping La Ballena Alegre, Girona.
Outbound reference: CEN-CENELEC.
Floortop 1K is only the sealer; it does not replace the UV-stable binder in the specification.
This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.




