Cool roof on PIR at the Reus Alzheimer’s centre with Impermax 2K

Home / Knowledge / Cool roof on PIR at the Reus Alzheimer’s centre with Impermax 2K

Cool roof on PIR at the Reus Alzheimer’s centre with Impermax 2K

Overhead courtyard at the Alzheimer Therapy Center in Reus, light-grey Impermax 2K roof deck, vertical wood cladding, mature pine, glass and cable rails

At the Alzheimer’s Therapy Center and Memory Unit in Reus, the cool roof combines PIR insulation panels, an Impermax 2K two-component polyurethane membrane and a Colodur Pigmented white finish.

The building has a timber structure, and the specification should name Impermax 2K and the PIR insulation panels together. This project is not the 300 m² Edificio Catalunya roof, which used Impermax Cold Polyurea Supreme (solvent-free two-component polyurea).

01

How Impermax 2K was applied over the PIR panels

Magazine No. 2 describes PIR insulating panels (foamed insulation with low thermal conductivity) laid on top of the roof, where they provide both insulation and slope. Impermax 2K waterproofing resin was applied over them, followed by a cool-roof finish of Colodur Pigmented (one-component aliphatic polyurethane) in white. Catalogue 2026 lists ETA 10/0296, 25 years (W3), together with root-penetration and asbestos-encapsulation certificates for Impermax 2K. Outdoors, an aliphatic topcoat is required.

For consumption, read the current TDS, then use the calculator.

See also Impermax 2K on cool roofs, thermal-acoustic insulation roofs and Impermax 2K.

External reference: EOTA — European Technical Assessments.

In the specification, list the PIR slope first, then Impermax 2K, then Colodur Pigmented white.

This article does not replace the current TDS, SDS or a written specification. Pack sizes, mix ratio and consumption in kg/m² are given on the current data sheet; use the calculator to work out quantities for your area.

Scroll to Top